Chase cover repair or a new cover in Brickell
Your free inspection takes in the cover, the storm collar, the cap and the wood we can reach.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a chase cover in Brickell needs replacing
- Ceiling stain near the fireplace
- Storm collar slipped or missing
- Metal banging on the chase in wind
- Siding stains that grow after rain
Jump to
Chimney chase cover work in Brickell
Shrouds on a chase top need a listing
Decorative shrouds over a chase top are chosen for their look. For factory-built chimneys, the building code treats them strictly. A shroud needs a listing and label for the exact chimney system under it, and it goes on per that system's instructions.
A shroud without that listing can change how heat and air leave the top of the pipe. If your chase already carries one, we look for its label and compare it with the chimney's documents. Where no listed shroud exists for your system, a plain cover with the chimney's own cap is the usual answer, and we say why.
Lifted edges and loose screws
Wind works at the edges of a chase cover. Once a screw pulls loose or corrodes through, the skirt can lift slightly, and each gust lifts it a little more. Water then blows under the edge and runs down the inside of the wall.
Loose edges can often be heard before they are seen, as a tapping or banging on windy days. Mention it when you call. We check the fasteners, the wood they grip and the shape of the skirt. If the skirt is bent or the wood beneath is soft, refastening alone will not hold.
Approving related chase repairs together
A chase cover job often turns up related work: a storm collar past saving, a soft sheathing edge or siding that has taken water. You can approve them together or spread them out, and both are reasonable choices.
Every item you approve inside the 72 hours that follow your free inspection gets 10% off. Anything you approve later is priced at the estimate's written figure. We explain which repairs protect the new cover and which can wait safely, so the timing is your decision rather than a sales tactic.
Reaching the chase top safely
Chase tops can be awkward to reach. The chase may rise from a steep section of roof, sit close to the edge or stand tall above the roof line. We look at the access before climbing and plan it so the roof covering is not damaged along the way.
If you know of fragile roof areas, recent repairs or loose sections near the chase, tell us. We note the roof condition around the chase in the findings. Where we see roof damage outside our work, we describe it plainly so you can pass it to a roofer.
Chase cover details we write down in Brickell
- Drip edge along the skirt
- Seam construction of the cover
- Old cover and fasteners removed
- Workmanship warranty on the fitting
Answers about chase covers in Brickell
Do you make chase covers to measure?
Yes. Chases vary in size and pipe position, so most covers are made to the measurements we take on the roof. That can mean one visit to measure and another to fit, and we explain the sequence at the start.
Is the fireplace safe to use while the chase leaks?
Water in a chase can reach the chimney pipe and the fireplace below it. If you see water inside or fresh corrosion in the firebox, stop using the fireplace and have the chase top and chimney checked before the next fire.
Is the chase cover part of the chimney's listed system?
The cover itself is often made to measure, but the parts where the pipe passes through it are usually specified by the chimney maker. We follow the chimney instructions for the collar, the storm collar and the air spaces.
More Ways to Care for Your Fireplace
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo