Chase cover repair or a new cover in Coral Shores
We measure the chase top on the roof and fit a cover shaped to move water off it.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chase cover faults worth a call in Coral Shores
- Water pooling on top of the cover
- A sagging or dished chase top
- Gap around the pipe collar
- Soft siding just below the top
Jump to
Measuring and fitting a chase cover in Coral Shores
Measure over the siding, not the framing
The cover has to fit over the chase as it is finished, not over the framing underneath. Siding, stucco and trim add thickness to each wall, and a cover sized to the framing can end up too small to lap over the outside.
We measure the outside of the finished chase at the top. Where the walls are out of square or the siding is uneven, we note the largest dimension and how the skirt will handle it. That care at the measuring stage is what lets the new cover sit properly on the first fitting.
Cap height above the new cover
Chimney instructions can set how far the cap on the pipe must sit above the chase top flashing. A new cover built higher or with a taller collar than the old one can change that distance. So can a chase whose top has been built up during framing repair.
We check the cap height against the chimney instructions once the new cover is planned. If the pipe needs an extra section to keep the right height, we explain it before ordering. That part comes from the chimney's own system, and it appears on the estimate as its own item.
The order a chase cover job follows
A chase cover job follows a simple order. We confirm the chimney system, measure the chase and check what we can see. Once the old cover is off, any framing or sheathing repair you approved is done. Then the new cover goes on, followed by the storm collar, sealant and cap.
That order keeps the new cover from being fastened onto damaged wood or fitted around a pipe that needs attention. If your job has several stages, the estimate shows them in sequence. We explain any waiting time between stages before you approve.
Arranging chase cover work for a home in Coral Shores
Booking a chase cover visit takes a short call. We ask what you have seen, whether the fireplace is used and whether you know the chimney maker, then agree a time to come out.
On the day, we look at the chase from the yard, the roof and inside near the fireplace. For homes in Coral Shores, the free inspection and the free written estimate work the same as for any other job we quote. The findings are explained before we leave, and the decisions stay with you.
What a chase cover proposal should list
- Cover metal and gauge named
- Cap on the pipe checked for reuse
- Fastener type and spacing on the skirt
- Temporary cover over the open chase
Chase cover replacement questions in Coral Shores
Do you make chase covers to measure?
Yes. Chases vary in size and pipe position, so most covers are made to the measurements we take on the roof. That can mean one visit to measure and another to fit, and we explain the sequence at the start.
Which metal should a replacement chase cover be made from?
Galvanized, stainless and copper covers are all made. The choice depends on the chimney, the metals nearby, the look you want and the budget. We name the metal and its gauge on the estimate and explain why we suggest it.
Can the existing cap stay on the chimney pipe?
It can, if it is sound and is the cap listed for that chimney. We check it while we are up there. A damaged cap, or one that does not belong to the system, is noted as a separate item for you to decide on.
More Ways to Care for Your Fireplace
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Hurricane and Storm Damage Chimney RepairAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Ventless Gas Fireplace ServiceService the identified vent-free appliance without bypassing its required safety components.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo