Chase cover repair or a new cover in Country Walk
Upfront pricing for chase cover work in Country Walk, with no hidden fees and a written record.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What a worn chase cover looks like in Country Walk
- Rust streaks down the chase siding
- Ceiling stain near the fireplace
- Rust flakes inside the fireplace
- Metal banging on the chase in wind
Jump to
What a new chase cover involves in Country Walk
Air spaces the chimney maker calls for
Some factory-built chimney systems call for specific gaps at the chase top. One maker's instructions describe spacing clips that keep the chase top flashing off the framing and a gap under the storm collar for ventilation. Those gaps let air move around the pipe inside the chase.
Well-meaning repairs sometimes seal those gaps shut with caulk or roofing cement. That can trap heat and moisture where the chimney was not designed to hold them. We check the air spaces during the inspection and fit the new cover so they stay as the instructions describe.
Shrouds on a chase top need a listing
Decorative shrouds over a chase top are chosen for their look. For factory-built chimneys, the building code treats them strictly. A shroud needs a listing and label for the exact chimney system under it, and it goes on per that system's instructions.
A shroud without that listing can change how heat and air leave the top of the pipe. If your chase already carries one, we look for its label and compare it with the chimney's documents. Where no listed shroud exists for your system, a plain cover with the chimney's own cap is the usual answer, and we say why.
A sagging middle and what holds it up
A wide chase top with no support under the cover can sag over time. Water then collects in the dip, and the metal corrodes faster where it sits. Stepping on the cover during roof work speeds up the sag.
One chimney maker's instructions allow non-combustible supports to be added under the chase top parts, as long as the required ventilation is kept. We look at whether your chase needs that kind of support. If it does, the estimate describes it, and the new cover is shaped so water leaves the top.
Workmanship warranty and the maker's terms
Our workmanship warranty covers how the chase top was installed: the fit of the cover, its fastening and the seals at the pipe. Before you approve anything, we explain what it covers.
Parts that belong to the chimney system, like a replacement storm collar or cap, may carry their maker's own terms. We hand those on with the record of the job. If something looks wrong later, describe it to us. We then work out whether it comes from the installation, a part or something new, such as storm damage.
Parts of the chase job priced separately
- Outside size of the chase top
- Skirt depth over the chase walls
- Storm collar fit and seal
- Water path from the old cover traced
Chase cover FAQs for homes in Country Walk
How can I tell whether my chimney has a chase cover?
If the chimney is a boxed structure finished in siding or stucco with a metal pipe at the top, it has a chase and almost certainly a cover. A brick or block chimney with clay flues has a crown instead. We confirm which during the free inspection.
Why is there a gap between the storm collar and the cover?
Some chimney systems call for air spaces at the chase top so the chase stays ventilated around the pipe. Where the instructions show them, those gaps are part of the design, not a fault, and we keep them when fitting the new cover.
Does your warranty cover the new chase cover?
Our workmanship warranty covers the installation work we carry out, and we explain what it covers before you approve. A listed chimney part may also carry its maker's terms, and we pass those on with the written record.
More Ways to Care for Your Fireplace
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Chimney Masonry RepairRepair affected chimney brickwork and joints with materials selected for the construction already in place.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Ventless Gas Fireplace ServiceService the identified vent-free appliance without bypassing its required safety components.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo