Chimney chase cover replacement for homes in Fisher Island
A cover with cross-breaks, a drip edge and a proper collar keeps rain out of the framed chase.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs a chase cover in Fisher Island is failing
- Holes rusted through the cover
- Cover edges lifting in wind
- Gap around the pipe collar
- Siding stains that grow after rain
Jump to
Chase cover decisions for homes in Fisher Island
How the cover's seams are joined
A chase cover is folded and joined at its corners. Those seams can be welded, soldered, riveted or simply folded, depending on the metal and the maker. One cover maker lists welded seams on its stainless covers, and an open seam can let water into the skirt.
We look at the seams on the old cover, since corrosion often starts there. On the new cover, the estimate states how the seams are made. If a folded corner is proposed, we explain how it is sealed. That detail matters on a part that spends its life taking rain on every edge.
Looking at the pipe where it passes through
While the cover is off, the chimney pipe at the top of the chase is easy to see. We look at its outer casing for corrosion, dents and loose joints, and at whether it stands straight in the opening.
The pipe belongs to the chimney system, so its parts follow the maker's instructions. If a section looks damaged, we tell you and explain what replacement would involve. We do not hide pipe damage under a new cover. It is noted in the findings and priced separately if you decide to go ahead.
New siding and the cover skirt
When a chase is re-sided, the new finish can change the outside size of the chase. A cover that fitted the old siding may now be too tight to lap over the new, or leave a gap where the skirt used to sit.
If you are planning new siding or stucco on the chase, it is worth coordinating the cover with that work. We can measure once the new finish is on, so the skirt laps it properly. Tell us about any planned exterior work when you call, and we plan the timing around it.
Tall chases and wind at the top
A chase that rises well above the roof catches more wind than a short one. Its cover takes stronger gusts, and loose edges or weak fasteners show up sooner. Tall chases can also sway slightly if the framing is not braced as it should be.
If your chase is tall, mention it when you call. We look closely at the fastening, the skirt and the framing at the top. Where the cover needs more fasteners than the old one had, or the framing needs attention, the estimate says so and explains why.
What a chase cover proposal should list
- Skirt depth over the chase walls
- Cross-breaks or slope to shed water
- Old cover and fasteners removed
- Workmanship warranty on the fitting
Worth knowing before a chase cover is replaced
Can the existing cap stay on the chimney pipe?
It can, if it is sound and is the cap listed for that chimney. We check it while we are up there. A damaged cap, or one that does not belong to the system, is noted as a separate item for you to decide on.
Do I need to be home while the chase cover is replaced?
Not for all of it. The work is on the roof, but we may want to look at the fireplace and any ceiling stains inside. Tell us when booking how to reach you and how to access the property.
What should I tell you when I call about the chase?
Describe what you see from the ground, any stains or water inside and whether the fireplace is used. Mention the chimney maker if you know it. With that, we can plan the visit to your home in Fisher Island and bring the right gear.
More Ways to Care for Your Fireplace
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Wood-Burning Fireplace Insert InstallationFit a wood-burning insert after assessing its host fireplace and full connection requirements.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo