Stainless chase covers fitted in Harbor Beach
Two pipes, odd shapes or a stucco chase, the cover is made to fit what is actually there.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chase cover trouble visible from the yard
- A sagging or dished chase top
- Rust flakes inside the fireplace
- Gap around the pipe collar
- Cover smaller than the chase top
Jump to
Chase cover details that decide the result
Cover, collar and storm collar work as a set
A chase top is really three parts working together. The cover spans the box. A raised collar around the hole lifts the opening above any water on the cover. A storm collar clamped to the pipe sits over that raised collar and sheds rain away from the joint.
If one part fails, the other two cannot make up for it. A new cover with an old, loose storm collar can still leak at the pipe. We check all three during the free inspection and tell you which ones need replacing, so the estimate covers the whole joint rather than one piece of it.
Sizing the hole to the listed pipe
The hole in a chase cover is not simply the pipe diameter. The chimney maker's instructions call for a clearance around the pipe, and cover makers note that their dimensions include clearances for the holes. Cutting the hole tight to the pipe can break those rules.
We identify the chimney pipe and its instructions before specifying the hole. The estimate records the hole size and position we measured. That way the cover arrives with the right clearance built in, rather than being cut on the roof to whatever seems to fit.
Shrouds on a chase top need a listing
Decorative shrouds over a chase top are chosen for their look. For factory-built chimneys, the building code treats them strictly. A shroud needs a listing and label for the exact chimney system under it, and it goes on per that system's instructions.
A shroud without that listing can change how heat and air leave the top of the pipe. If your chase already carries one, we look for its label and compare it with the chimney's documents. Where no listed shroud exists for your system, a plain cover with the chimney's own cap is the usual answer, and we say why.
What we walk you through once it is fitted
When the new cover is on, we point out its shape, the way it drains and where it is fastened. We show the storm collar, the sealant at the pipe and whether the cap went back on or was replaced.
Anything we spotted outside the job, such as siding near the top that looked tired, gets mentioned again at this point. Ask whatever comes to mind while you can still see the work from the yard. The aim is that you know what now sits on the chase and could describe it to the next person who asks.
What your chase cover estimate covers in Harbor Beach
- Outside size of the chase top
- Pipe hole position and diameter
- Listed chase top parts for the chimney
- Water path from the old cover traced
Answers about chase covers in Harbor Beach
Should I paint my old chase cover to slow the corrosion?
Paint can slow surface corrosion on a cover that is otherwise sound, but it does not close holes or fix a flat top that holds water. We tell you honestly whether paint is worth it or the cover is past that point.
Do I need to be home while the chase cover is replaced?
Not for all of it. The work is on the roof, but we may want to look at the fireplace and any ceiling stains inside. Tell us when booking how to reach you and how to access the property.
Is the chase cover part of the chimney's listed system?
The cover itself is often made to measure, but the parts where the pipe passes through it are usually specified by the chimney maker. We follow the chimney instructions for the collar, the storm collar and the air spaces.
More Ways to Care for Your Fireplace
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Hurricane and Storm Damage Chimney RepairAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo