Chimney chase cover replacement for homes in Idlewyld
Within the 72-hour window after your free inspection, approved chase cover work carries a 10% discount.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chase cover trouble visible from the yard
- Old tar or cement patches on top
- Soft siding just below the top
- Paint peeling off the metal top
- Siding stains that grow after rain
Jump to
Chase cover replacement explained for Idlewyld
Sealant that stays flexible at the collar
The joints around the pipe can move as the metal heats and cools. The chimney instructions we work from call for a non-hardening waterproof sealant at those joints. A hard sealant, or a heavy smear of roofing cement, can crack and let water through.
We look at the old sealant around the collar and the storm collar during the inspection. Cracked, hardened or missing sealant is a common source of leaks even on covers that look sound. On a new cover, we use the type the chimney instructions call for and note it in the record of the work.
Name the metal and gauge on the estimate
Chase covers are made from galvanized steel, stainless steel or copper, in different thicknesses. A cover described only as heavy duty or premium gives you nothing to compare. The metal and its gauge belong on the estimate in plain words.
We write the metal, the gauge, the seam construction and the finish on the proposal. If we recommend a particular metal for your chase, we say why in a sentence. That lets you weigh our proposal against another one on the same terms, and it tells anyone working on the chimney later what is up there.
Skirt screws and the metal they are made of
The cover is held by fasteners through the skirt into the chase walls. One chimney maker's instructions call for several fasteners per side on its chase top parts. Too few, or screws driven into rotted wood, and the cover can lift in wind.
Fastener metal matters too. A plain steel screw through a stainless skirt can corrode away and leave a hole. We use fasteners that suit the cover metal and drive them into sound material. The written record lists what was used and where, so the next person can match them when the cover is checked.
A loose cover in wind is a hazard
A chase cover that has lost its fasteners can lift in a strong wind and come off in pieces. A sheet of metal falling from roof height can injure someone or damage a car or window. If the cover is visibly loose, keep people away from the area below.
Do not try to hold it down or pull it off from a ladder. Tell us when you call that the cover is loose and where it would land if it came off. That changes how soon the visit should happen. If a sheet is already hanging, say so clearly.
Included in your chase cover visit in Idlewyld
- Pipe hole position and diameter
- Skirt depth over the chase walls
- Flexible sealant at the collar
- Roof access planned around the chase
Chase cover questions, answered for Idlewyld
Do you make chase covers to measure?
Yes. Chases vary in size and pipe position, so most covers are made to the measurements we take on the roof. That can mean one visit to measure and another to fit, and we explain the sequence at the start.
Do I need to be home while the chase cover is replaced?
Not for all of it. The work is on the roof, but we may want to look at the fireplace and any ceiling stains inside. Tell us when booking how to reach you and how to access the property.
Who handles a leak that comes through the chase siding?
If water enters through the siding or stucco rather than the top, that is chase repair rather than cover replacement. We trace the water path and tell you which part lets it in, so the estimate addresses the actual entry point.
More Ways to Care for Your Fireplace
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo