Chase cover repair or a new cover in Lauderdale Isles
We trace where the water got in first, so a new cover is proposed only when it is the cause.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What a worn chase cover looks like in Lauderdale Isles
- Holes rusted through the cover
- Gap around the pipe collar
- Soft siding just below the top
- Cover smaller than the chase top
Jump to
Planning chase cover replacement in Lauderdale Isles
How the skirt meets different wall finishes
Chase walls may be finished in lap siding, panel siding, stucco or another cladding. Each finish meets the cover skirt differently. Lap siding has steps the skirt must clear, while stucco has a hard edge that needs the skirt to sit tight against it.
We note the finish on your chase and how the skirt will be fastened through or over it. Where the finish near the top is damaged, cracked or loose, we point that out as a separate repair. The cover should not be fastened into material that is already failing.
A written record of the chase work
Once the chase top is finished, the job is written down for you. The note gives the cover's metal, gauge and shape, the fasteners and sealant used, and what happened to the storm collar and the cap. Items we saw but were not asked to repair are listed too.
File it with the house documents. A roofer, a buyer's inspector or our own team on a later visit can read exactly what was done. Even a free inspection that did not lead to work leaves you a free written estimate and its findings for your home in Lauderdale Isles.
Chase tops on a maintenance visit
On a maintenance visit, we look at the cover for standing water and corrosion and check the fasteners and skirt. The sealant and storm collar around the pipe get a look as well, since joints there tend to open first.
Catching a backed-out screw or a cracked bead of sealant is a small job compared with drying out a soaked chase. We sort what we see into items worth doing soon and items to watch. Any repair beyond a quick adjustment waits for your approval.
Looking at the pipe where it passes through
While the cover is off, the chimney pipe at the top of the chase is easy to see. We look at its outer casing for corrosion, dents and loose joints, and at whether it stands straight in the opening.
The pipe belongs to the chimney system, so its parts follow the maker's instructions. If a section looks damaged, we tell you and explain what replacement would involve. We do not hide pipe damage under a new cover. It is noted in the findings and priced separately if you decide to go ahead.
Included in your chase cover visit in Lauderdale Isles
- Seam construction of the cover
- Listed chase top parts for the chimney
- Top of the framing checked once exposed
- Water path from the old cover traced
Answers about chase covers in Lauderdale Isles
How can I tell whether my chimney has a chase cover?
If the chimney is a boxed structure finished in siding or stucco with a metal pipe at the top, it has a chase and almost certainly a cover. A brick or block chimney with clay flues has a crown instead. We confirm which during the free inspection.
Why does water sit on top of my chase cover?
Flat covers, and covers that have sagged, hold water instead of shedding it. Standing water speeds up corrosion and can eventually find a way into the chase. A replacement with cross-breaks or a slope, plus a drip edge, moves the water off.
What happens if the wood under the old cover is soft?
We stop and show you. Soft sheathing or framing at the top of the chase is chase repair, a separate job with its own price. The open top is covered in the meantime, and nothing is added without your approval.
More Ways to Care for Your Fireplace
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Ventless Gas Fireplace ServiceService the identified vent-free appliance without bypassing its required safety components.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo