Chimney chase cover replacement for homes in Little Haiti
We tell you plainly whether a patch will hold or the cover has reached its end.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chase cover trouble visible from the yard
- Rust streaks down the chase siding
- Cover edges lifting in wind
- Metal banging on the chase in wind
- Cracked sealant around the pipe
Jump to
Our chase cover process for homes in Little Haiti
Measuring the chase top properly
A chase cover is measured on the roof, with a tape and a sketch of the top. We record the outside size of the chase, where each pipe sits and how large it is. The skirt depth goes down too, along with anything that breaks the rectangle, such as trim or a step in the wall.
Cover makers publish worksheets for exactly these measurements, and they warn that the dimensions must include clearances. A measurement guessed from the ground or copied from the old cover can carry old mistakes forward. The estimate lists our measurements so you can see what the new cover is built to.
Folded corners and where they leak
The corners of a chase cover are where the skirt folds meet. On a folded or poorly joined corner, a small gap can let water run inside the skirt and down the corner of the chase. Corners are also where corrosion often starts on older covers.
We look closely at the corners of the old cover and at the siding below them. On the new cover, the estimate says how the corners are formed and sealed. That small detail decides whether water runs off the corner or into it.
Tapping and banging from the chase top
A chase cover that taps or bangs on windy days usually has a loose edge, a missing fastener or a storm collar knocking against the pipe. The sound often carries down the chase and seems louder inside the house than it is outside.
Mention which side of the house the noise seems to come from and whether it happens in light wind or only strong gusts. On the roof, we look for the part that moves. A loose skirt over sound wood can be refastened, but a bent cover or soft framing needs more than screws.
Parts from one chimney system at the top
A factory-built chimney is tested as a set of parts from one maker. Mixing a storm collar, cap or chase top part from another system is not allowed unless the listing says so. A part that looks similar may not match the pipe's dimensions or its tested clearances.
When a listed part at the chase top needs replacing, we identify the chimney maker and order from that system or its approved alternatives. The estimate names the part and its source. We do not adapt parts from another brand to make them fit.
Your chase cover quote in Little Haiti, itemized
- Seam construction of the cover
- Fastener type and spacing on the skirt
- Chimney label and model details
- Roof access planned around the chase
What people ask about chase covers
How does the inspection discount apply to a chase cover?
The window opens at your own free inspection and lasts 72 hours. Anything you approve from the estimate inside it, the cover included, is 10% off, and the written price holds if you decide later.
Is the fireplace safe to use while the chase leaks?
Water in a chase can reach the chimney pipe and the fireplace below it. If you see water inside or fresh corrosion in the firebox, stop using the fireplace and have the chase top and chimney checked before the next fire.
Does your warranty cover the new chase cover?
Our workmanship warranty covers the installation work we carry out, and we explain what it covers before you approve. A listed chimney part may also carry its maker's terms, and we pass those on with the written record.
More Ways to Care for Your Fireplace
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo