Stainless chase covers fitted in Miami Gardens
We follow the chimney maker's rules at the pipe, so the air spaces and storm collar stay right.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a chase cover in Miami Gardens needs replacing
- Rust streaks down the chase siding
- A sagging or dished chase top
- Old tar or cement patches on top
- Ceiling stain near the fireplace
Jump to
Measuring and fitting a chase cover in Miami Gardens
Sloped chase tops on wider chases
On some chases, a cover with a true slope sheds water better than cross-breaks alone. The top is pitched away from the pipe, sometimes in one direction and sometimes in several. That can suit wide chases or chases with more than one pipe.
A sloped cover takes more measuring and fabrication, and the collar has to stay square to the pipe even though the sheet is not level. We explain when slope is worth it for your chase and when cross-breaks will do the job. The choice appears on the estimate with a short reason.
Rotted framing found under the cover
Long leaks can rot the top plates and studs of a chase. When the old cover comes off, soft or blackened wood at the top is a sign that water has been getting in for some time. Fastening a new cover into rotted wood gives it little to hold.
Framing repair is part of chase repair, a separate job. We describe what we found, how far it seems to go and what repair would involve. You decide whether to go ahead. The new cover then goes onto sound framing, or the chase is protected until the repair can be scheduled.
One line per part on a chase estimate
A chase estimate should let you see the job in pieces. The cover, the storm collar and any cap or listed chase top part each get a price and a short description. Framing, sheathing and siding repair are listed the same way.
With the work split up, you can say yes to the new metal and hold the carpentry, or schedule both together. The layout also makes gaps visible, such as drywall inside, which is not part of our work. If a line on our proposal reads loosely, point to it, and we reword it before you decide.
Cap height above the new cover
Chimney instructions can set how far the cap on the pipe must sit above the chase top flashing. A new cover built higher or with a taller collar than the old one can change that distance. So can a chase whose top has been built up during framing repair.
We check the cap height against the chimney instructions once the new cover is planned. If the pipe needs an extra section to keep the right height, we explain it before ordering. That part comes from the chimney's own system, and it appears on the estimate as its own item.
Chase cover details we write down in Miami Gardens
- Pipe hole position and diameter
- Flexible sealant at the collar
- Written record of the cover work
- Water path from the old cover traced
Worth knowing before a chase cover is replaced
Does the storm collar get replaced with the cover?
Often, yes. The storm collar seals the gap between the pipe and the new cover's collar. If the old one is corroded, bent or loose on the pipe, it is replaced as part of the job and listed on the estimate.
What should I tell you when I call about the chase?
Describe what you see from the ground, any stains or water inside and whether the fireplace is used. Mention the chimney maker if you know it. With that, we can plan the visit to your home in Miami Gardens and bring the right gear.
Does your warranty cover the new chase cover?
Our workmanship warranty covers the installation work we carry out, and we explain what it covers before you approve. A listed chimney part may also carry its maker's terms, and we pass those on with the written record.
More Ways to Care for Your Fireplace
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo