Chimney chase cover replacement for homes in North Bay Village
Two pipes, odd shapes or a stucco chase, the cover is made to fit what is actually there.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs a chase cover in North Bay Village is failing
- Rust flakes inside the fireplace
- Metal banging on the chase in wind
- Chimney pipe leaning in its collar
- Siding stains that grow after rain
Jump to
What a new chase cover involves in North Bay Village
The raised collar around the pipe hole
Where the pipe passes through the cover, the hole is surrounded by a raised collar. The collar lifts the opening above the surface of the cover, so water running across the top does not flow straight into the gap around the pipe.
A collar that is too short, bent over or cracked at its base lets water past. So does a hole cut without any collar at all, which is common on patched or improvised covers. We check the collar height and condition and make sure the new cover's collar suits the pipe and the storm collar that sits over it.
Stainless covers and the grade question
Stainless steel covers resist corrosion better than bare steel, and cover makers commonly build them with welded seams. Stainless is not one material, though. Grades vary, and the screws, collar and storm collar may not match the sheet.
Ask which grade the cover uses and what the fasteners are made of. We put both on the estimate. The aim is a cover whose parts weather at a similar pace, so a sound sheet is not let down by a corroding screw or collar. That is part of why we name every part, not only the sheet.
How the cover's seams are joined
A chase cover is folded and joined at its corners. Those seams can be welded, soldered, riveted or simply folded, depending on the metal and the maker. One cover maker lists welded seams on its stainless covers, and an open seam can let water into the skirt.
We look at the seams on the old cover, since corrosion often starts there. On the new cover, the estimate states how the seams are made. If a folded corner is proposed, we explain how it is sealed. That detail matters on a part that spends its life taking rain on every edge.
Unlike metals on a chase top near the coast
Where unlike metals touch, salt-laden moisture speeds up the corrosion between them. A stainless cover held with plain steel screws, or copper touching a galvanized storm collar, can leave one part failing long before the rest. A small part fares worst when it is the metal that corrodes, such as a plain steel screw.
Near the coast, we look closely at every metal that meets at the chase top: the cover, the screws, the collar, the storm collar and the cap. We match them where we can and explain how the parts are kept apart where we cannot. The written record lists each metal used.
Included in your chase cover visit in North Bay Village
- Second hole for another vent
- Chimney label and model details
- Old metal and sealant hauled away
- Roof access planned around the chase
Answers about chase covers in North Bay Village
Is the fireplace safe to use while the chase leaks?
Water in a chase can reach the chimney pipe and the fireplace below it. If you see water inside or fresh corrosion in the firebox, stop using the fireplace and have the chase top and chimney checked before the next fire.
What happens if the wood under the old cover is soft?
We stop and show you. Soft sheathing or framing at the top of the chase is chase repair, a separate job with its own price. The open top is covered in the meantime, and nothing is added without your approval.
Is the chase cover part of the chimney's listed system?
The cover itself is often made to measure, but the parts where the pipe passes through it are usually specified by the chimney maker. We follow the chimney instructions for the collar, the storm collar and the air spaces.
More Ways to Care for Your Fireplace
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo