Chase cover repair or a new cover in Palmetto Estates
Stainless, galvanized or copper, the metal is chosen for the chimney and named in writing.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chase cover faults worth a call in Palmetto Estates
- Cover edges lifting in wind
- Rust flakes inside the fireplace
- Storm collar slipped or missing
- Soft siding just below the top
Jump to
Chase cover details that decide the result
Soft siding just below the top edge
If the siding near the top of the chase feels soft, looks swollen or has paint bubbling off it, water has probably been getting behind it. The top few courses are usually the first to show it, because they sit right under the edge of the cover.
Do not press or pry at it from a ladder. Tell us what you see, and we look at it during the inspection. Siding and sheathing repair belong to chase repair, which is quoted separately from the cover. Replacing the cover without dealing with soaked wood beneath it leaves the problem in place.
A written record of the chase work
Once the chase top is finished, the job is written down for you. The note gives the cover's metal, gauge and shape, the fasteners and sealant used, and what happened to the storm collar and the cap. Items we saw but were not asked to repair are listed too.
File it with the house documents. A roofer, a buyer's inspector or our own team on a later visit can read exactly what was done. Even a free inspection that did not lead to work leaves you a free written estimate and its findings for your home in Palmetto Estates.
Approving related chase repairs together
A chase cover job often turns up related work: a storm collar past saving, a soft sheathing edge or siding that has taken water. You can approve them together or spread them out, and both are reasonable choices.
Every item you approve inside the 72 hours that follow your free inspection gets 10% off. Anything you approve later is priced at the estimate's written figure. We explain which repairs protect the new cover and which can wait safely, so the timing is your decision rather than a sales tactic.
A pipe that has shifted in its opening
Sometimes the chimney pipe no longer sits centered in the cover's collar. It may lean to one side or press against the edge of the hole. That can mean a support inside the chase has moved, or that the pipe was not braced as its instructions describe.
A new cover will not straighten a pipe that has moved. We note the lean, look at what we can see of the supports and tell you what it suggests. Any work on the pipe or its supports follows the chimney maker's instructions and is priced as its own item.
Measured before a chase cover is ordered
- Seam construction of the cover
- Listed chase top parts for the chimney
- Fastener type and spacing on the skirt
- Workmanship warranty on the fitting
Answers about chase covers in Palmetto Estates
Why does water sit on top of my chase cover?
Flat covers, and covers that have sagged, hold water instead of shedding it. Standing water speeds up corrosion and can eventually find a way into the chase. A replacement with cross-breaks or a slope, plus a drip edge, moves the water off.
Is the fireplace safe to use while the chase leaks?
Water in a chase can reach the chimney pipe and the fireplace below it. If you see water inside or fresh corrosion in the firebox, stop using the fireplace and have the chase top and chimney checked before the next fire.
Will a new cover stop the stains on my siding?
It should stop new rust from running down, if the old cover was the source. Existing stains stay until they are cleaned or weather away. We tell you whether the stains came from the cover or from another metal part.
More Ways to Care for Your Fireplace
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Wood-Burning Fireplace Insert InstallationFit a wood-burning insert after assessing its host fireplace and full connection requirements.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo