Chimney chase cover replacement for homes in Pembroke Park
A cover with cross-breaks, a drip edge and a proper collar keeps rain out of the framed chase.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chase cover faults worth a call in Pembroke Park
- Holes rusted through the cover
- Ceiling stain near the fireplace
- Gap around the pipe collar
- Cracked sealant around the pipe
Jump to
The chase cover job, from measure to seal
Sloped chase tops on wider chases
On some chases, a cover with a true slope sheds water better than cross-breaks alone. The top is pitched away from the pipe, sometimes in one direction and sometimes in several. That can suit wide chases or chases with more than one pipe.
A sloped cover takes more measuring and fabrication, and the collar has to stay square to the pipe even though the sheet is not level. We explain when slope is worth it for your chase and when cross-breaks will do the job. The choice appears on the estimate with a short reason.
Leave the chase top to us
Please do not climb onto the roof to look at the chase cover, measure it or refasten it. Chase tops are often reached across steep roof sections, and a loose cover can shift under a hand or foot. Sharp edges on corroded metal cut easily.
A description from the yard is enough for us to plan with. We arrive with ladders, a tape and the means to protect the roof, and the chase gets measured and checked in the same trip. Staying off also keeps foot traffic away from roof areas that may already be tired.
Keeping combustibles clear of the pipe
A factory-built chimney pipe needs a clearance to wood and other combustible materials along its whole run, including at the top of the chase. The listing and the maker's instructions set that clearance, and nothing should be packed into the gap.
When the chase top is open, we look for insulation, debris or framing crowding the pipe. If we find it, we explain what should change and why. That work follows the chimney instructions and is listed separately. The new cover then goes on over a chase top that respects the clearance.
Checking a chase top more often near the water
A chase cover near the coast works harder than the same cover inland. Salt deposits collect on the metal and in the seams, and rain may not rinse them off. Sealant, fasteners and corners tend to show wear sooner.
In that exposure, a maintenance visit that includes the chase top is worth considering more often. We look at the corners, the collar, the storm collar and the screws. Tell us how close the house is to open water and which side takes the wind. That helps us decide what to look at first.
What a chase cover proposal should list
- Collar height around each pipe
- Listed chase top parts for the chimney
- Old cover and fasteners removed
- Screened lid section where listed
Answers about chase covers in Pembroke Park
Can you fit a cover with a screened, lidded section?
Some chase covers can be made with a screen and removable lid around the pipe. On a factory-built chimney, anything that acts as a shroud has to be listed for that chimney, so we check the maker's options before quoting one.
Is the chase cover part of the chimney's listed system?
The cover itself is often made to measure, but the parts where the pipe passes through it are usually specified by the chimney maker. We follow the chimney instructions for the collar, the storm collar and the air spaces.
Is a same-day chase cover fitting available?
Same-day service is available when the schedule allows, but most covers are made after measuring. We tell you at the inspection whether a same-day fitting is realistic for your chase and how the top is protected meanwhile.
More Ways to Care for Your Fireplace
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo