Chase cover repair or a new cover in Riverland
A made-to-measure cover, fastened into sound framing and backed by our workmanship warranty.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a chase cover in Riverland needs replacing
- Gap around the pipe collar
- Soft siding just below the top
- Cover shifted after a strong storm
- Chimney pipe leaning in its collar
Jump to
Planning chase cover replacement in Riverland
What we walk you through once it is fitted
When the new cover is on, we point out its shape, the way it drains and where it is fastened. We show the storm collar, the sealant at the pipe and whether the cap went back on or was replaced.
Anything we spotted outside the job, such as siding near the top that looked tired, gets mentioned again at this point. Ask whatever comes to mind while you can still see the work from the yard. The aim is that you know what now sits on the chase and could describe it to the next person who asks.
What to mention when you call about the chase
You do not need trade terms to book a visit. Tell us what you see from the ground, where you have noticed water or stains inside and roughly when they started. Mention whether the fireplace is used and whether anything else vents through the chase.
If you know the chimney maker or have the installation manual, mention it. Tell us about recent roof work, new siding or storms. Those details shape the visit, what we bring and whether we plan to measure for a new cover on the same trip.
When the house sits empty for long stretches
In a house that is empty for months, a leaking chase can go unnoticed until the stain on the ceiling is large. Water has time to soak the framing, and nobody hears the loose cover tapping in the wind.
Before a long absence, a look at the chase top can head off surprises. Let us know the dates you will be away, who holds a key and the best way to send findings to you. We check the cover, fasteners and sealant and write up anything that needs a decision.
Keeping combustibles clear of the pipe
A factory-built chimney pipe needs a clearance to wood and other combustible materials along its whole run, including at the top of the chase. The listing and the maker's instructions set that clearance, and nothing should be packed into the gap.
When the chase top is open, we look for insulation, debris or framing crowding the pipe. If we find it, we explain what should change and why. That work follows the chimney instructions and is listed separately. The new cover then goes on over a chase top that respects the clearance.
Chase cover scope, line by line
- Skirt depth over the chase walls
- Sheathing damage noted as its own item
- Screened lid section where listed
- Old metal and sealant hauled away
Chase cover questions worth asking in Riverland
What happens if the wood under the old cover is soft?
We stop and show you. Soft sheathing or framing at the top of the chase is chase repair, a separate job with its own price. The open top is covered in the meantime, and nothing is added without your approval.
Can you fit a cover with a screened, lidded section?
Some chase covers can be made with a screen and removable lid around the pipe. On a factory-built chimney, anything that acts as a shroud has to be listed for that chimney, so we check the maker's options before quoting one.
What will the written record show after the job?
The cover's metal and gauge, its shape, how it was fastened and sealed, what happened to the storm collar and cap, and anything we saw but did not repair. Keep it with your other house papers.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo