Stainless chase covers fitted in Shenandoah
Homes in Shenandoah with framed chimneys get a cover measured on the roof, not guessed from the yard.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a chase cover in Shenandoah needs replacing
- Cover edges lifting in wind
- Soft siding just below the top
- Chimney pipe leaning in its collar
- Cracked sealant around the pipe
Jump to
Measuring and fitting a chase cover in Shenandoah
A cover on a stucco-finished chase
If your chase is finished in stucco, the top edge of the stucco often takes the first water from a failing cover. Cracks, dark patches and hollow sounds near the top can be signs that water has been getting behind the finish.
Stucco repair is not part of a cover replacement, but it matters to the result. We look at the top of the stucco when the old cover comes off and tell you what we see. The new cover is then fastened so its skirt protects the stucco edge, and any stucco repair is quoted on its own line.
Lifted edges and loose screws
Wind works at the edges of a chase cover. Once a screw pulls loose or corrodes through, the skirt can lift slightly, and each gust lifts it a little more. Water then blows under the edge and runs down the inside of the wall.
Loose edges can often be heard before they are seen, as a tapping or banging on windy days. Mention it when you call. We check the fasteners, the wood they grip and the shape of the skirt. If the skirt is bent or the wood beneath is soft, refastening alone will not hold.
Soft siding just below the top edge
If the siding near the top of the chase feels soft, looks swollen or has paint bubbling off it, water has probably been getting behind it. The top few courses are usually the first to show it, because they sit right under the edge of the cover.
Do not press or pry at it from a ladder. Tell us what you see, and we look at it during the inspection. Siding and sheathing repair belong to chase repair, which is quoted separately from the cover. Replacing the cover without dealing with soaked wood beneath it leaves the problem in place.
Water timing that points to the source
Notice when water appears. Water inside during a heavy downpour often points to a hole in the cover or a failed storm collar, where the path is short. Water that shows up a day later, or only when wind blows from one side, may be soaking through siding or around trim instead.
Keep a simple note of the date, the weather and where the water appeared. Share it when you arrange the free inspection. That record helps us check the most likely source first and avoids replacing a cover that was not the problem.
Your chase cover quote in Shenandoah, itemized
- Collar height around each pipe
- Seam construction of the cover
- Old cover and fasteners removed
- Water path from the old cover traced
Answers about chase covers in Shenandoah
How can I tell whether my chimney has a chase cover?
If the chimney is a boxed structure finished in siding or stucco with a metal pipe at the top, it has a chase and almost certainly a cover. A brick or block chimney with clay flues has a crown instead. We confirm which during the free inspection.
What will the written record show after the job?
The cover's metal and gauge, its shape, how it was fastened and sealed, what happened to the storm collar and cap, and anything we saw but did not repair. Keep it with your other house papers.
Does your warranty cover the new chase cover?
Our workmanship warranty covers the installation work we carry out, and we explain what it covers before you approve. A listed chimney part may also carry its maker's terms, and we pass those on with the written record.
More Ways to Care for Your Fireplace
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Ventless Gas Fireplace ServiceService the identified vent-free appliance without bypassing its required safety components.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo