Chimney chase cover replacement for homes in South Miami Heights
The cap on the pipe is checked too, and kept if it is sound and belongs to the chimney.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs a chase cover in South Miami Heights is failing
- Old tar or cement patches on top
- Ceiling stain near the fireplace
- Paint peeling off the metal top
- Metal banging on the chase in wind
Jump to
Chimney chase cover work in South Miami Heights
Cover, collar and storm collar work as a set
A chase top is really three parts working together. The cover spans the box. A raised collar around the hole lifts the opening above any water on the cover. A storm collar clamped to the pipe sits over that raised collar and sheds rain away from the joint.
If one part fails, the other two cannot make up for it. A new cover with an old, loose storm collar can still leak at the pipe. We check all three during the free inspection and tell you which ones need replacing, so the estimate covers the whole joint rather than one piece of it.
Air spaces the chimney maker calls for
Some factory-built chimney systems call for specific gaps at the chase top. One maker's instructions describe spacing clips that keep the chase top flashing off the framing and a gap under the storm collar for ventilation. Those gaps let air move around the pipe inside the chase.
Well-meaning repairs sometimes seal those gaps shut with caulk or roofing cement. That can trap heat and moisture where the chimney was not designed to hold them. We check the air spaces during the inspection and fit the new cover so they stay as the instructions describe.
Paint on an old cover is a stopgap
Paint can slow surface corrosion on a galvanized cover that is otherwise sound. It does not close holes, lift a sagging middle or stop water pooling around the pipe. Painting over corrosion without cleaning it first mostly hides the problem for a while.
We tell you honestly whether painting your current cover is worth the cost. If the metal is thin, holed or dished, the money is better spent on a replacement shaped to shed water. If paint is reasonable, we explain the preparation it needs to last.
Checking the chase top after strong wind
Strong storms can lift a chase cover, tear its screws out or bend its skirt. From the ground, look for a cover that sits unevenly, a skirt edge standing away from the wall, or pieces of metal on the roof or lawn. Keep people clear of anything loose.
Do not climb up to refasten it yourself. Describe what you see, and tell us whether water has reached the inside since the storm. We look at the cover, the storm collar, the cap and the top of the framing. The estimate then separates urgent items from the rest.
Your chase cover quote in South Miami Heights, itemized
- Top of the framing checked once exposed
- Second hole for another vent
- Written record of the cover work
- Finish or paint on the new metal
Your chase cover questions, answered
Which metal should a replacement chase cover be made from?
Galvanized, stainless and copper covers are all made. The choice depends on the chimney, the metals nearby, the look you want and the budget. We name the metal and its gauge on the estimate and explain why we suggest it.
Is the fireplace safe to use while the chase leaks?
Water in a chase can reach the chimney pipe and the fireplace below it. If you see water inside or fresh corrosion in the firebox, stop using the fireplace and have the chase top and chimney checked before the next fire.
Do I need to be home while the chase cover is replaced?
Not for all of it. The work is on the roof, but we may want to look at the fireplace and any ceiling stains inside. Tell us when booking how to reach you and how to access the property.
More Ways to Care for Your Fireplace
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo