
Chimney chase cover replacement for homes in West Miami
We measure the chase top on the roof and fit a cover shaped to move water off it.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chase cover faults worth a call in West Miami
- Cover edges lifting in wind
- Ceiling stain near the fireplace
- Loose screws along the skirt
- Soft siding just below the top
Jump to
A made-to-measure chase cover in West Miami
When corrosion has opened holes
A hole in a chase cover, however small, lets water straight into the framed box below. It often starts where water sits, around the collar or in a sagging middle.
Holes are hard to see from the ground but easy to find on the roof. We look for pinholes, thin spots that flex under light pressure and rust staining on the underside where we can see it. A cover with holes through it is normally replaced rather than patched, and we show you why on the day.
One line per part on a chase estimate
A chase estimate should let you see the job in pieces. The cover, the storm collar and any cap or listed chase top part each get a price and a short description. Framing, sheathing and siding repair are listed the same way.
With the work split up, you can say yes to the new metal and hold the carpentry, or schedule both together. The layout also makes gaps visible, such as drywall inside, which is not part of our work. If a line on our proposal reads loosely, point to it, and we reword it before you decide.
Until the new cover is fitted
If the new cover is being made, the old one usually stays in place until fitting day. Where it is leaking badly, we discuss how to reduce water entry in the meantime without sealing the air spaces the chimney needs.
Do not use the fireplace if water has been reaching it. Move valuables away from any stained area and keep an eye on it after rain. If the situation gets worse before fitting day, call us. We would rather hear about a change early than find more damage when the old cover comes off.
Why stock covers rarely fit a chase
Stock chase covers come in a limited set of sizes, while chases are framed to suit each house. A stock cover that is slightly too large leaves a loose skirt, and one slightly too small does not lap the walls. Either way, water finds the gap.
That is why we usually recommend a made-to-measure cover. It costs more to make than a stock size, but it fits the chase you have. If a stock cover happens to suit your chase, we say so. The estimate states which kind we are proposing and why.
Checked on the chase top in West Miami
- Seam construction of the cover
- Second hole for another vent
- Old metal and sealant hauled away
- Workmanship warranty on the fitting
Chase cover questions, answered for West Miami
Will a new chase cover fix rotted wood in the chase?
No. The cover stops new water from entering, but rotted sheathing or framing needs its own repair. We note that damage separately, often once the old cover is off, and you decide on it before the chase is closed.
Can one cover handle two pipes coming through the chase?
Yes. Covers can be made with two or more holes, each with its own collar. Each pipe keeps the termination its own instructions call for, so we identify what each pipe serves before the cover is ordered.
What should I tell you when I call about the chase?
Describe what you see from the ground, any stains or water inside and whether the fireplace is used. Mention the chimney maker if you know it. With that, we can plan the visit to your home in West Miami and bring the right gear.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo