
Spalled brick replacement on chimneys in Biscayne Gardens
We show you the proposed brick next to the old before any unit is cut out.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Spalling brick signs to mention when you call
- Corners broken off several bricks
- Cracks running through single bricks
- Bricks that look loose or pushed out
- Vines rooted over damaged brick
Jump to
Choosing replacement brick for a chimney
Holding off on cleaners after the work
New mortar needs time to harden before any cleaner touches it. Federal preservation guidance warns against applying acids to dry masonry and notes that new joints are especially vulnerable to damage from cleaning.
If you plan to clean the chimney, wait until we confirm the joints have hardened, and start with plain water and a soft brush. You get a short list of products to avoid while the joints mature, so a well-matched repair is not stained or etched. Ask us before using any product you are unsure about.
White deposits beside flaking brick
White deposits near spalled brick are salts that water dissolved inside the wall and left at the surface as it dried. When they appear beside flaking faces, they show that water is moving through that part of the wall.
We treat them as a clue to the water path, not a separate problem. Finding where the water enters comes before replacing the damaged units. It may be the top, the flashing or open joints, and the new brick should not face the same wetting.
What changes the size of a brick job
Brick replacement jobs vary widely. The number of damaged units and where they sit both matter. So do the height of the chimney, access to the stack above the roof and how hard a matching brick is to find.
We explain which of these apply to your chimney. Each replacement area is priced upfront on the estimate. If the job changes once work begins, we pause and talk it through with you before any extra work goes ahead. Knowing those factors up front helps you plan around the work.
Spalling concentrated on one face
Spalling can gather on a single face of a chimney while the others stay sound. That face may catch more rain, dry more slowly or sit under a failing section of crown or flashing.
We compare the faces to find what sets the damaged one apart. The brick work may concentrate there, while the cause above or beside it is listed as its own repair. Treating both keeps the new units from wearing down the same way. Mention which side you noticed first, because that order helps.
The brick replacement items you approve
- Replacement brick matched in size
- Sample of the proposed brick match
- Debris kept out of the flue
- Debris removal and haul-away
Questions to ask before replacing bricks
Can you replace only the damaged bricks on my chimney?
Yes, where the masonry around them is sound. We cut out the spalled or cracked units, clean the openings and set matching brick in mortar that suits the wall. If damage is widespread or the chimney is moving, we explain a wider repair instead.
Can a crumbling brick just be patched with mortar?
A skim of mortar over a lost face is not a brick. It tends to crack away and can hold water against the damaged unit. We cut out and replace units that have lost their face or cracked through.
Is spalled brick near the ground treated differently?
Brick near the ground can stay wet from the soil or from water splashing back. Brick industry guidance lists rising damp among possible causes of masonry distress. We look at drainage and plantings at the base as well as the brick itself.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
