Spalled and cracked chimney bricks replaced in Magnolia Park
Replacing spalled brick in Magnolia Park, set in full joints and tooled to shed water.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Spalling brick signs to mention when you call
- Cracks running through single bricks
- Bricks that look loose or pushed out
- Brick cores showing where faces fell
- Chipped edges where joints were ground out
Jump to
Choosing replacement brick for a chimney
Cracks that run through the brick face
A hairline line on the surface of a brick is different from a crack that runs through its face. Brick industry guidance treats cracks extending through the face shell as a reason to replace the unit.
We look at the crack's width, its path and whether the face on either side sits level. A crack through the face can let water into the brick and the wall behind. That unit goes on the replacement list, and we look at what cracked it before choosing the new one.
Stone and manufactured stone need their own methods
Natural stone and manufactured stone veneer are not replaced like brick. They have their own setting methods, joint widths and installation instructions, and they belong to stone chimney repair.
Where a chimney combines brick with stone, the two materials get different methods. The brick replacement estimate covers only brick units, and any stone work is described separately with its own materials and approach. Stone repairs follow the veneer or stone maker's instructions rather than brick practice. If you are unsure which your chimney has, the free inspection settles it.
Cleaning mortar off new and old brick faces
Some mortar lands on the faces around a replaced brick during setting. For that cleanup, federal preservation guidance favors natural bristle or nylon brushes over metal ones, which can scratch brick.
We brush the faces while the mortar is still soft, and ease off any hardened spots gently rather than scraping them. The aim is a clean face around crisp new joints, with no harsh cleaning that would damage the surrounding brick. Excess mortar struck off at the joint edge also keeps cleanup light.
Old hard patches beside damaged brick
Earlier repairs sometimes left patches of dense, bright mortar across a chimney face. Brick industry guidance warns that mortar stronger than the original can concentrate stress and lead to spalled brick faces nearby.
When damaged units sit next to such patches, we explain the likely link. The patches may need to come out and be repointed with a suitable mix when the bricks are replaced. That joint work is listed separately, with its reason, so you can decide on it.
Brick replacement priced area by area
- Water source notes before replacement
- Tooling to match the existing profile
- Overnight cover for an open chimney top
- Debris removal and haul-away
Spalling brick repair questions from Magnolia Park
Why are bricks from an earlier replacement flaking again?
When replacement units fail in the same spot, the cause may not have been fixed. Water may still reach that area, the mortar may be too hard or the brick may not suit the exposure. We look for the cause before replacing them again.
Can one cracked brick wait, or should it be replaced now?
A single hairline crack in an otherwise firm brick may be watched. A crack through the face, a loose unit or a face that is coming away should be replaced, because water can keep entering there. We explain which applies.
How long does a chimney brick replacement job take?
It depends on how many units are involved, how easy the chimney is to reach and how long a matching brick takes to find. We give you a realistic schedule with the estimate and tell you if anything changes it.
More Ways to Care for Your Fireplace
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo