
Spalling brick repair for chimney faces in Plantation
If the damage is too widespread for single bricks, we explain the wider repair it needs.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Clues that point to spalled brick
- Corners broken off several bricks
- Cracks running through single bricks
- Earlier replacement bricks failing again
- A clear sealer flaking off the brick
Jump to
From damaged unit to matched new brick
A repellent is no substitute for new brick
Clear water repellents are sometimes offered as a fix for flaking brick. Brick industry guidance says repellents are not recommended in place of removing and replacing brick with spalled faces or cracks through the face shell.
A repellent cannot put back material that has already fallen away, and it cannot close a crack through a unit. We replace the damaged brick first. Once repairs are done, the same guidance suggests waiting to see whether a repellent is needed at all, and we discuss that separately.
Tooling new joints to match the wall
The joints around a replaced brick are tooled once the mortar is thumbprint hard. Brick industry guidance explains that a joint tooled at that point is pressed dense and tight to the brick edges, and it asks for the original profile to be matched.
Tooled too soon, the joint smears and dries lighter. Tooled too late, it stays loose at the surface and dries darker. We time the tooling so the new joints blend with the old in shape and shade, which is what makes a replaced unit hard to spot.
What to tell us about damaged brick
A few details help us plan. Tell us which face of the chimney shows damage, whether pieces have fallen and where, and whether you have seen water inside. Mention any earlier brick replacement, repointing, sealer or paint.
It also helps to know how the roof is reached and whether a furnace or water heater shares the chimney. Rough answers are fine. Old invoices or notes from earlier repairs help too, because a history of fixes can explain why the brick failed.
When damaged brick can wait
Not every inspection ends with bricks being replaced. A chimney can show light surface wear, a stable hairline crack or shallow flaking that is not letting water in. In that case, replacement may not be needed yet.
We tell you what we checked and what would change the answer, such as a face coming away, a crack opening or pieces falling. A maintenance visit later can confirm how the brick is holding. Work the chimney does not need does not go on your estimate.
Inside a chimney brick replacement proposal
- Break-out of each damaged unit
- Careful cutting of surrounding mortar
- Soft-bristle cleanup of mortar smears
- Written record of units replaced
Questions to ask before replacing bricks
Can you replace only the damaged bricks on my chimney?
Yes, where the masonry around them is sound. We cut out the spalled or cracked units, clean the openings and set matching brick in mortar that suits the wall. If damage is widespread or the chimney is moving, we explain a wider repair instead.
Does the workmanship warranty cover replaced bricks in Plantation?
Yes, the agreed brick replacement carries our workmanship warranty. The written record lists which units were replaced and where, so any question later can be checked against the work that was done.
What if the damage turns out worse once bricks come out?
We stop and show you. If more units are loose or the damage runs deeper, we explain the options and price the added work before continuing. Nothing is added to the scope without your approval.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
