Chimney bricks replaced and matched in Pompano Beach
Our family team explains the cause, the match and the method in plain words.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Cracked and flaking brick worth a closer look
- Brick faces flaking or popping off
- Corners broken off several bricks
- Peeling paint taking brick surface with it
- Earlier replacement bricks failing again
Jump to
Brick replacement decisions for homes in Pompano Beach
Dampening before the new brick goes in
Dry brick pulls water out of fresh mortar too fast. Brick industry guidance asks for the surrounding brick to be dampened before a new unit is set. Surface water should soak in first, so the bond is good.
We wet the opening and the new brick as the material requires, then wait for the surface film to disappear. On a warm, dry day that step matters more. It is one of several small steps that decide whether the new unit stays tight or loosens later.
Keeping the chimney's original bond pattern
Most chimneys are laid in a regular pattern of overlapping bricks. A replacement that breaks that pattern shows from the ground and can weaken the overlap that ties the wall together.
We follow the existing pattern when setting new units, including any headers or special courses. Where earlier repairs disrupted the pattern, we point that out and explain whether it matters for the new work. The aim is a repair that reads as part of the chimney, not as a patch.
Brick corners damaged by earlier grinding
Chipped brick edges along the joints can trace back to an earlier repointing done with a grinder. Federal preservation guidance shows how power tools used on thin joints break brick edges and overcut the joints.
Damaged edges make joints look wider and leave thin mortar at the face. Where the damage is cosmetic, the bricks may stay. Where edges have broken away enough to let water in, replacing the unit may be the better answer. We explain which applies to each area.
Booking chimney brick replacement in Pompano Beach
To book brick work in Pompano Beach, phone us or use the form on this page. Describe the damage you have seen, and we arrange a free inspection at a time that suits your household. You do not need to do anything on the roof.
During the visit, we check the brick and the parts that send water into it, then explain the findings. You receive a written estimate listing each unit. Services you approve inside 72 hours of that free inspection come with a 10% discount.
Before you approve brick replacement in Pompano Beach
- Survey of damaged units on each face
- Surface marks separated from face loss
- Sample of the proposed brick match
- Tooling to match the existing profile
Answers about chimney brick replacement
Can a crumbling brick just be patched with mortar?
A skim of mortar over a lost face is not a brick. It tends to crack away and can hold water against the damaged unit. We cut out and replace units that have lost their face or cracked through.
Will new bricks stop water getting into the house?
They can close an entry point where broken brick lets water in. Water can also enter through the crown, flashing or joints. We explain what the brick work addresses, and a hose water test comes into it only if the job calls for one.
Can you replace bricks on the part of the chimney above the roof?
Yes. Access is planned from the roof, with protection for the roof covering. Bricks near the top often take the most water, so we also check the crown and cap above them before replacing units.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo