Spalling brick repair for chimney faces in Riverside Park
Approve brick work within 72 hours after your free inspection and save 10% on it.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Brick trouble you can spot from the yard
- Corners broken off several bricks
- Cracks running through single bricks
- Spalled brick just above the roofline
- Damp patches that stay on damaged bricks
Jump to
Replacing chimney bricks the careful way
What spalling brick repair involves on a chimney
Spalling brick repair replaces units whose face has flaked, popped off or cracked through. The damaged brick is cut out, the opening is cleaned and a matching brick is set in fresh mortar. Sound brick around it stays in place.
The other half of the job is the cause. Water is usually part of the cause. We look for where that water comes from and explain it alongside the replacement. New units should not be asked to survive the conditions that broke the old ones.
Structural cracks need their own investigation
Structural cracks fall outside routine maintenance. Brick industry maintenance guidance says they call for an investigation to find the cause and the right repair. A leaning stack, bulging brickwork or a chimney pulling away from the house belong in that category.
We do not answer those conditions with a few new bricks. We explain what we see, what further assessment may be needed and how brick replacement might fit once the structure is understood. That keeps a simple repair from being asked to solve a structural problem.
Covering an open top during brick work
Most brick replacement leaves the top of the chimney closed. When work near the top means lifting the cap or leaving the flue open, rain and debris could get in.
If the chimney is open when we stop for the day, the opening is covered until we return. The cap goes back once the upper work is done. Worn fixings or a damaged cap are pointed out and priced as their own item. Covering the opening is routine for us, not an extra charge.
Cutting out chimney brick is not DIY work
Cutting out a damaged brick looks simple and is easy to get wrong. A chisel in the wrong place can loosen the bricks around it, a grinder can chip their edges, and working on a roof carries real risk of a fall.
The free inspection is the safer way to learn what the job involves. We point out each damaged unit, describe how it would come out and what would replace it, and leave the decision with you. Nothing is cut until you approve the estimate.
Inside a chimney brick replacement proposal
- New brick buttered and set in place
- Joints pointed full around new units
- Protection for roof, windows and plantings
- Soft-bristle cleanup of mortar smears
Chimney brick questions we hear
What happens to the mortar around a replaced brick?
The joints around each new unit are filled completely and tooled to match the existing profile. The mortar is chosen to behave like the existing mortar, because a mix that is too hard can damage the bricks next to it.
Is spalled brick near the ground treated differently?
Brick near the ground can stay wet from the soil or from water splashing back. Brick industry guidance lists rising damp among possible causes of masonry distress. We look at drainage and plantings at the base as well as the brick itself.
Can one cracked brick wait, or should it be replaced now?
A single hairline crack in an otherwise firm brick may be watched. A crack through the face, a loose unit or a face that is coming away should be replaced, because water can keep entering there. We explain which applies.
More Ways to Care for Your Fireplace
- Chimney Masonry RepairRepair affected chimney brickwork and joints with materials selected for the construction already in place.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
- Ventless Gas Fireplace ServiceService the identified vent-free appliance without bypassing its required safety components.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo