Chimney cap installation on homes across Biscayne Gardens
Homes in Biscayne Gardens get the same measured approach, the flue first and then the cap that fits it.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Cap faults we fix on chimneys in Biscayne Gardens
- Cap fasteners loose or missing
- One flue capped and another left open
- Old cap glued or siliconed in place
- Cracked flue tile under the cap
Jump to
Small details that decide a chimney cap fit
Measure the tile, not the hole
For a cap that clamps onto a flue tile, the outside size of the tile matters more than the opening inside it. Tile walls vary in thickness, and a cap sized to the inside of the flue can end up too small to slide over. Rectangular tiles also need both sides measured.
We take those measurements on the roof during the free inspection. Where the tile is chipped, out of square or wrapped in old mortar, we note it, because that changes the fit. The estimate lists the sizes we measured, so the cap that arrives is the cap that fits your flue.
Planning a change to the fireplace
If you are thinking about adding an insert, changing fuel or taking the fireplace out of use, mention it before the cap is chosen. A change like that can bring a new liner with its own termination, and the cap fitted today might have to come off again.
We would rather hear your plans early and fit a cap that suits them, or hold off on the cap until the larger decision is made. The estimate can show both routes. That way you do not pay for a cap twice because the plans for the fireplace changed a few months later.
Whistling or humming from the cap
Humming, whistling or buzzing in the wind usually means something on the cap is vibrating. It may be a loose part, a screen pulled away from its frame or a lid knocked out of square. The noise can carry down the flue and sound louder indoors than it is outside.
Note when you hear it and how strong the wind was. We check the fasteners, the screen mounting and the lid alignment. Often a loose part can be secured. If the frame is bent or worn, the quieter fix is a new cap fitted properly, and we explain which case you have before any work begins.
Arranging access when you are not home
Cap work mostly happens outside, so you may not need to be home for it. We still need to know how to reach the roof safely and whether we can look at the fireplace inside. Gates, pets and alarm systems all need a plan.
Tell us when booking whether someone will be at the house and how to reach you during the visit. If we need to see the fireplace and nobody is home, we arrange that part for another time. The findings and the estimate are sent to you, and nothing is done without your approval.
What a chimney cap proposal should name
- Crown surface under a multi-flue cap
- Mesh screen for sparks and animals
- Open flue covered at day's end
- Written record of the cap work
Your chimney cap questions, answered in Biscayne Gardens
Will a new cap stop water getting into the fireplace?
A cap keeps rain out of the flue opening. It cannot stop water that enters through a cracked crown, open mortar joints or failed flashing. If water keeps appearing after the cap is fitted, the entry point probably lies elsewhere and needs its own assessment.
Does a spark screen matter if I rarely burn wood?
The screen also keeps birds and animals out, so it earns its place on a seldom-used chimney. Where a spark arrestor is fitted to a masonry chimney, the Florida Building Code sets how open its mesh must be and requires access for cleaning.
What will I receive once the cap is fitted?
A written record of the work: the cap installed, its metal, how it was fastened and anything we noted but did not repair. Keep it with your house papers, because the next person on the roof will find it useful.
More Ways to Care for Your Fireplace
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo