Chimney cap replacement for your home in Glenvar Heights
Our family team fits the cap, clears the roof area and hauls the old parts away.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a chimney cap in Glenvar Heights should be replaced
- Leaves or twigs landing in the firebox
- Rain dripping onto the fireplace floor
- Cap fasteners loose or missing
- Old cap glued or siliconed in place
Jump to
How a chimney cap is matched to your flue
What we show you once the cap is on
Once the cap is fitted, we walk you through what was done. That includes the cap style, how it is fastened and how the lid or screen comes off for cleaning. We also mention anything on the chimney top that was outside the job.
Ask questions at that point. It is easier to explain the top while the details are fresh than months later. If there was something we recommended but you chose to leave for now, we note it again, so it does not get lost. You should come away knowing what is on your chimney and why.
A written record of the cap work
After the job, you receive a written record of the work. It names the cap, the metal, the screen and the fastening method, along with any repairs done at the same time. It also notes what we saw but did not repair, such as a crown crack you chose to handle later.
Keep that record with your house papers. It helps anyone who works on the chimney after us, and it helps you if the house is sold. If you had a free inspection without going ahead, you still keep the free written estimate and the findings it lists for your home in Glenvar Heights.
Papers that help with a cap job
Old invoices, inspection notes and chimney paperwork can explain what is on the roof. They may show that a liner was added, a cap was replaced or a crown was patched. For a factory-built chimney, the installation manual and the label tell us which cap is listed.
Gather what you have, but do not worry if there is nothing. A document describing a past repair does not prove the repair is still sound, so we check it in place anyway. The papers simply help us understand the chimney faster and avoid ordering the wrong cap for it.
Caps that mount on a liner's top plate
Where a chimney has been relined with a stainless liner, the liner usually hangs from a top plate on the crown. The liner maker supplies a cap that fastens to that plate or to the liner itself. One maker's instructions show the cap removed by its screws for cleaning.
If your chimney has a liner, the replacement cap should be the one the liner system calls for, not a generic cap clamped over the plate. We identify the liner and its top plate before recommending anything. The written record then notes the liner system, so a future cap can be matched without guesswork.
Checked before a new cap is ordered in Glenvar Heights
- Flue count and position on the top
- Outside size of each flue tile
- Crown surface under a multi-flue cap
- Debris cleared from the roof and hauled away
Your chimney cap questions, answered in Glenvar Heights
Do I need to measure the flue before calling you?
No, and please stay off the roof. We measure every flue during the free inspection, along with the crown or tile the cap will fasten to. You only need to describe what you have noticed and roughly when it started.
Why does smoke come into the room after a cap was fitted?
A clogged screen, a lid set too low or a cap that is too small for the flue can hold smoke back. Stop using the fireplace and ask us to look at the cap and the flue before the next fire.
Do you work on chimneys that serve more than one appliance?
Yes. When one chimney carries flues for a fireplace and another appliance, each flue keeps the termination its appliance calls for. We identify what each flue serves before choosing one cap or separate ones.
More Ways to Care for Your Fireplace
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo