Worn chimney cap replacement in Hillsboro Pines
Tell us what happened to the old cap, and we find out why before fitting the next one.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chimney cap warning signs around Hillsboro Pines
- Rain dripping onto the fireplace floor
- Screen clogged with soot or debris
- Smoke spilling into the room after cap work
- Old cap glued or siliconed in place
Jump to
Choosing and fitting chimney caps in Hillsboro Pines
Slip-in caps on round flues
A slip-in cap is made for a round flue. Its legs press outward against the inside of the tile or liner, and that tension holds it in place without bolts. Each size covers a narrow range of diameters, so the measurement has to be right.
This style suits a sound round flue with a clean top edge. It is less suited to a flue that is out of round, cracked near the top or lined with a liner that has its own termination. Tell us if the flue looks round from the ground. We confirm the shape and diameter before any slip-in cap is ordered.
Measure the tile, not the hole
For a cap that clamps onto a flue tile, the outside size of the tile matters more than the opening inside it. Tile walls vary in thickness, and a cap sized to the inside of the flue can end up too small to slide over. Rectangular tiles also need both sides measured.
We take those measurements on the roof during the free inspection. Where the tile is chipped, out of square or wrapped in old mortar, we note it, because that changes the fit. The estimate lists the sizes we measured, so the cap that arrives is the cap that fits your flue.
Caps on a maintenance visit
Caps benefit from a look now and then, even when nothing seems wrong. On a maintenance visit, we check the fasteners, the lid height, the screen for holes or clogging, and the tile or crown around the base. Small problems are easier to deal with before the cap comes loose.
If you book a maintenance visit for the fireplace or chimney, the cap is part of it. We note anything that needs attention and tell you whether it is urgent or can wait. Nothing is replaced during a maintenance visit without your approval first.
A loose cap is a falling hazard
A cap that has worked loose can fall in a strong wind. Metal edges and bolts dropping from roof height can hurt someone below or damage a car or window. If the cap looks tilted or partly detached, keep people away from the area beneath the chimney.
Do not try to pull it off or push it back from a ladder. Tell us when you call that the cap looks loose, and where it would land if it fell. A loose cap changes how the visit is planned. If it is already hanging, say so clearly, because that changes how soon the visit should happen.
Cap details listed on the estimate in Hillsboro Pines
- Cap style suited to the mounting surface
- Crown cracks noted as a separate item
- Roof access and protection of the roof covering
- Fastener metal matched to the cap
What to ask about a chimney cap in Hillsboro Pines
Will you need to drill into my chimney crown?
Only for caps that mount on the crown. Their flanges are fastened into the crown and kept back from its edge so the concrete does not crack. Caps that clamp to a flue tile or band around the brick need no drilling there.
Can the new cap come off for chimney sweeping?
It should. Where a spark arrestor is fitted, the Florida Building Code requires the screen or cap to be removable for flue cleaning. We show you how the lid or cap comes off and leave it that way.
Can you replace just the screen on my cap?
Where the maker offers a replacement screen and the rest of the cap is sound, that can be enough. A piece of generic mesh is not the same thing, because the opening size affects both sparks and draft.
More Ways to Care for Your Fireplace
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo