Chimney cap installation on homes across North Golf Estates
Cap work you sign off on inside 72 hours of the free inspection carries a 10% discount.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a chimney cap in North Golf Estates should be replaced
- Scratching or chirping heard in the flue
- Screen clogged with soot or debris
- One flue capped and another left open
- Nesting material showing at the top
Jump to
What goes into a new chimney cap in North Golf Estates
Bolt-on caps and the tile they grip
A familiar single-flue design drops over the tile and tightens against it with a bolt in each corner. Its maker's instructions say the bolts should hold the tile firmly without driving into it. Some of these caps carry a metal ridge between each bolt and the tile for that reason.
A bolt-on cap is only as secure as the tile it grips. If the top edge of the tile is chipped, cracked or crumbling, the bolts have little to hold, and tightening them harder can break the tile further. We check the tile edge first and list any tile repair as a separate item.
When no stock cap fits the flue
Stock caps come in a limited set of sizes and shapes. Oversized tiles, unusual rectangles, flues of very different heights and chimneys with an irregular top can fall outside every standard option. Cap makers offer made-to-measure caps for exactly that reason.
A custom cap takes careful measuring and an order to the maker, so it may mean one visit to measure and another to fit. We tell you that at the start rather than forcing a stock cap onto an opening it does not suit. The estimate shows the measured sizes and the cap design we are ordering for your chimney.
What we show you once the cap is on
Once the cap is fitted, we walk you through what was done. That includes the cap style, how it is fastened and how the lid or screen comes off for cleaning. We also mention anything on the chimney top that was outside the job.
Ask questions at that point. It is easier to explain the top while the details are fresh than months later. If there was something we recommended but you chose to leave for now, we note it again, so it does not get lost. You should come away knowing what is on your chimney and why.
Galvanized caps in air that carries salt
Galvanized coatings wear faster where the air carries chlorides from nearby salt water. Corrosion data for zinc coatings rank warm marine air close to industrial air in how hard it is on the metal. Wind direction and distance from the shore change the rate.
For a home close to the coast, that shifts the metal choice for a cap. A galvanized cap may still be an option, but we explain what to expect from it in that exposure. The estimate names the metal we recommend for the flue and the reason, so you can weigh cost against how the cap will weather.
What we measure before quoting a chimney cap
- Outside size of each flue tile
- Condition of the tile's top edge
- Access for later sweeping and screen cleaning
- Draw check once the cap is on
Settling chimney cap questions in North Golf Estates
Does a spark screen matter if I rarely burn wood?
The screen also keeps birds and animals out, so it earns its place on a seldom-used chimney. Where a spark arrestor is fitted to a masonry chimney, the Florida Building Code sets how open its mesh must be and requires access for cleaning.
Why does smoke come into the room after a cap was fitted?
A clogged screen, a lid set too low or a cap that is too small for the flue can hold smoke back. Stop using the fireplace and ask us to look at the cap and the flue before the next fire.
Do you work on chimneys that serve more than one appliance?
Yes. When one chimney carries flues for a fireplace and another appliance, each flue keeps the termination its appliance calls for. We identify what each flue serves before choosing one cap or separate ones.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo