Chimney cap replacement for your home in Tamiami
Spark screens, rain caps and multi-flue caps, each chosen for the flue it has to serve.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a chimney cap in Tamiami should be replaced
- Rattling from the chimney top in wind
- Mesh screen torn, bent or missing
- Cap shifted after a strong storm
- Metal flakes on the hearth or damper
Jump to
What goes into a new chimney cap in Tamiami
Clues you can read from the yard
A lot can be seen without a ladder. Stand back from the house, use binoculars if you have them, and look at the top of the chimney. A missing cap, a lid sitting crooked, a torn screen or dark streaks below the cap are all visible from the yard.
Indoors, look at the firebox floor and the damper for leaves, twigs, rust flakes or damp patches. Note what you see and when you first saw it. Those notes help us plan the visit to your home in Tamiami, and they tell us whether to bring a cap, a screen or measuring gear only.
Fasteners that suit the cap metal
Where two unlike metals touch and stay wet, one of them tends to corrode faster than it would on its own. Corrosion guidance for galvanized steel adds that a small piece of the weaker metal against a large area of the other is the worst pairing.
On a cap, that small piece is often the fastener. A plain steel bolt through a stainless band or a copper lid can rust away and leave the cap loose. We use the fasteners the cap maker supplies or specifies, and we record what was used. Ask about fasteners when you compare cap proposals.
Roof access and protecting the roof
Reaching the chimney top means crossing part of the roof. Roof coverings differ in how well they take foot traffic, and some need careful stepping or boards to spread the load. We look at the roof around the chimney before climbing and plan the access to avoid damage.
If you know of loose or fragile areas, or a recent roof repair, tell us. We note the roof condition near the chimney in the findings. Where we see roof damage that is not ours to fix, we say so plainly, so you can call a roofer with a clear description.
Caps with a damper built in
Some products combine a cap with a damper that seals the flue top and opens with a cable from the fireplace. Others are dampers meant to sit under a separate cap. Both are a different job from a plain cap, with their own product rules.
If your chimney already has a damper at the top, tell us. We check how it works with the cap before recommending anything. If you are interested in adding one, a top sealing damper is quoted separately, because not every fireplace is suited to it.
Line items on a chimney cap estimate
- Flue count and position on the top
- Condition of the tile's top edge
- Handover on screen cleaning and lid removal
- Fastener metal matched to the cap
Common chimney cap questions, answered
Will you need to drill into my chimney crown?
Only for caps that mount on the crown. Their flanges are fastened into the crown and kept back from its edge so the concrete does not crack. Caps that clamp to a flue tile or band around the brick need no drilling there.
Should the crown be fixed before the cap is replaced?
If the crown is cracked where a multi-flue cap would fasten, yes, or the cap ends up mounted on a weak surface. We describe the crown during the free inspection and price that repair as a separate item.
What should I mention when I call about a cap?
Describe what you see from the ground, how the fireplace is used and whether anything else vents through the chimney. Mention recent roof work or strong storms. Those details help us plan the visit to your home in Tamiami.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo