Chimney crown coating and replacement options in Bermuda Riviera
Chimney crown repair in Bermuda Riviera with free written estimates and no hidden fees.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Crown problems to point out in Bermuda Riviera
- Water standing on the crown after rain
- Dark streaks on the brick below the top
- Peeling coating from an earlier repair
- Brick joints washing out just below the top
Jump to
The crown repair options we weigh with you
What the chimney crown is there to do
The crown is the masonry top that closes the gap between the outer brick and the flue liner. Its job is to shed rain off the chimney before water can soak into the wall below. The residential code calls this part a chimney cap and asks for it to be sloped, with a drip edge.
When the crown fails, water reaches the brick and the flue from the top down. We start each crown visit in Bermuda Riviera by checking how water leaves the top today. That tells us whether the crown needs a coating, a local repair or replacement.
What a crown estimate should break out
A crown estimate is easier to judge when each step is its own line. Removal of unsound concrete, preparation, forming or coating, sealing at the flues and resetting the cap are distinct tasks. Seeing them apart shows what you are paying for.
Our written estimate follows that pattern. Anything that falls outside the crown, such as brick repair below it or a new cap, is listed separately with a reason. You approve the lines you want, and nothing is added later without a conversation first.
Crowns on homes with more than one chimney
A house may have more than one chimney, and their crowns may not fail at the same pace. One may face more weather or have been repaired more recently. Each needs its own look.
We inspect each chimney you ask about and list its findings separately. You can approve work on one without committing to the others. If a chimney is no longer used, we still check its crown, because an unused chimney can let water into the house just as easily.
Keeping the flue sealant joint in good order
The sealant joint at each flue is often the first part of a crown to wear. Brick industry maintenance guidance expects sealants to need replacing well before the masonry around them. A split or hardened bead lets water run between liner and crown.
During maintenance visits we check that joint on every flue. Failed sealant is cut out, the joint is cleaned and primed, and a new bead goes in over backer material. It is a small job that protects the larger work of the crown.
Inside a crown repair proposal
- Bond break at each flue liner
- Crack preparation before any coating
- Flue liner projection above the crown
- Written record of completed crown work
Crown sealing and replacement answers
Can a crown with fine cracks be sealed rather than replaced?
It can, when the concrete around the cracks is firm and the crown still sheds water. A crown coating goes on a clean, dry and sound surface. If the top is loose, hollow or flat, sealing only hides the fault, so we explain replacement instead.
Does crown repair include the seal around the flue tiles?
It should. The residential code calls for a caulked bond break where each flue liner passes through the crown. We check that joint, remove failed sealant and reseal it with a suitable elastomeric product as part of the agreed crown scope.
Should I ask about the crown if the fireplace is never used?
Yes. The crown keeps rain out of the masonry whether or not you light fires. Water entering an unused chimney can still damage brick, the flue and nearby ceilings. A free inspection tells you whether the top needs attention.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo