Chimney crowns assessed and repaired in Boulevard Park Isles
Crown repair in Boulevard Park Isles starts with a free inspection and a plain explanation of what the chimney top needs.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When the crown at the chimney top needs work
- Hairline cracks across the crown surface
- Crumbling edges along the crown overhang
- A gap beside a flue tile
- A flat top with no visible slope
Jump to
Crown sealing, patching and rebuilding
A framed chimney has a cover, not a crown
Some chimneys are wood-framed boxes around a factory-built metal flue. Their top is a sheet-metal chase cover, and there is no masonry crown to repair. From the yard, the two can look alike, especially under a painted finish.
We confirm how the chimney is built before talking about crown work. If the top turns out to be a chase cover, we say so and explain that it belongs to a different repair. Nobody should pay for crown sealing on a chimney that has no crown.
Checking for hollow or loose crown sections
A crown can look intact and still have loose sections. Tapping lightly across the surface tells us where the concrete sounds solid and where it sounds hollow. Hollow areas have usually separated from the concrete or brick beneath.
This check shapes the whole recommendation. A coating over hollow concrete fails when the section breaks away. We mark the hollow areas and explain whether they can be removed and patched or whether the crown has lost too much to keep. You hear the reasoning on site.
Coating a newly formed crown
A new concrete crown does not always need a coating. A well-formed crown with slope, overhang, drip and sealed flue joints sheds water on its own. Some owners still ask for a coating as extra protection.
If you want one, we explain what the product adds and when it can be applied after the concrete has cured. The coating is listed as its own item. We would rather tell you it is optional than add it to every job without a reason.
Repairing one damaged section of a crown
A crown that is sound except for one broken section can sometimes be repaired locally. Loose material is removed back to firm concrete, and the section is rebuilt with a compatible repair material shaped to match the slope and edge.
A local repair only makes sense when the rest of the crown is in good condition. We explain where the repair begins and ends and how it will meet the existing surface. If a coating over the whole top is also advised, that is listed as its own item.
Separate lines for crown, cap and flue
- Crack preparation before any coating
- Cap removal and reinstallation
- Water path notes for leak questions
- Workmanship warranty on agreed crown work
Answers about chimney crown work
Can a crown with fine cracks be sealed rather than replaced?
It can, when the concrete around the cracks is firm and the crown still sheds water. A crown coating goes on a clean, dry and sound surface. If the top is loose, hollow or flat, sealing only hides the fault, so we explain replacement instead.
Can I coat the crown myself with a product from the store?
A crown coating only works on firm, clean and dry concrete, and it cannot hold loose pieces together. Roof work also carries real risk. If you are considering it, ask us first whether your crown is a suitable surface for any coating.
Can you repair the crown on a stone or stucco chimney?
The code allows a concrete, metal or stone top on a masonry chimney, and a stucco or stone face does not change the crown's job. We assess the top the same way and treat repairs to the sides as separate work.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo