Repairing and replacing chimney crowns in Coral Springs
If a coating will not hold on your crown, we say so and explain what replacement involves.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What a failing crown shows from the ground
- Dark streaks on the brick below the top
- A crown patch that has cracked again
- Sections of crown that look lifted
- Brick joints washing out just below the top
Jump to
Getting the chimney crown right in Coral Springs
The drip edge under a crown overhang
The residential code asks for a drip edge on the top of a masonry chimney. The drip breaks the path of water along the underside of the overhang, so it falls clear instead of creeping back to the brick. A missing or blocked drip lets the top courses stay wet.
On a new cast crown, the drip is formed into the underside as the concrete is shaped. On a precast unit, it is part of the casting. When we inspect an existing crown, we look under the edge to see whether a drip exists and whether it still works.
Reading the crown from the ground
You can learn a lot about the crown without climbing. Look for chunks of concrete in gutters or on the roof near the chimney. Look for dark streaks down the brick just below the top, or a patch of growth that stays green on the crown.
Brick industry maintenance guidance suggests binoculars for looking at high masonry. They help here too. Note what you see and tell us when you call. Leave the roof to us, because a steep or slick surface is not worth the risk for a closer look.
Staining on the brick below the crown
Streaks that run down from the top of the chimney show where water has been leaving the crown. A crown with no overhang or a failed drip lets water flow over the brick face instead of dropping clear. The stains are a record of that path.
We read the stain pattern together with the crown's shape. Streaks under one corner may point to a local break. Streaks all around the top can mean the crown sheds water badly by design. The repair differs in each case, and we explain which one we see.
The order of work at the chimney top
When several parts at the top need attention, the order matters. Loose brick below the crown is dealt with before anything else. The crown comes next, with its flue joints sealed. The cap and any damper go back on last.
Working in that order avoids fitting new parts over a surface that is about to change. We explain the sequence on your estimate and note which items you have approved. If you choose to delay one item, we explain how that affects the others.
What your crown estimate lists
- Firmness of the existing concrete
- Crack preparation before any coating
- Precast crown option where the top allows
- Aftercare instructions for the new surface
What people ask about crown sealing
Can you repair the crown on a stone or stucco chimney?
The code allows a concrete, metal or stone top on a masonry chimney, and a stucco or stone face does not change the crown's job. We assess the top the same way and treat repairs to the sides as separate work.
What if my chimney has a metal top instead of concrete?
Some masonry chimneys carry a metal or stone top rather than cast concrete. A framed chimney with a sheet-metal cover has no crown at all. We identify which one you have before suggesting any crown work.
Will crown work damage my roof covering?
The roof is protected where we stand, stage material and apply products. Spills are cleaned as the work proceeds. Tell us about fragile roofing before the visit so the access plan accounts for it.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo