Chimney crown replacement and repair across Edgewood
Debris from the old crown is hauled away, and any opening at the top is covered whenever work stops for the day.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Clues that the chimney crown lets water in
- Peeling coating from an earlier repair
- Loose cap fixings set into the concrete
- No overhang past the brick face
- Crown and brick separating along the top course
Jump to
How a crown repair runs, step by step
What mortar crown repair should mean
A request for mortar crown repair usually concerns that thin sloped topping. Patching it with more of the same mortar can look tidy for a while. The new patch shares every weakness of the old layer, including thin edges and no drip.
We explain the options in order. A firm topping with fine cracks may take a coating. A cracked or loose topping is removed, and a new crown is formed with proper thickness, slope and overhang. You choose after seeing what the inspection found on your chimney.
Heat from the flue and crown cracking
A flue carries hot gases while the crown sits in outdoor air. The two grow and shrink at different rates. A crown cast hard against the liner can take that stress into the concrete.
That is why the code asks for a bond break at the liner, and why brick industry guidance mentions thermal movement alongside shrinkage. When we see cracks that start at a flue, we check the joint there first. Resealing it correctly can matter as much as repairing the crack itself.
Keeping the area under the chimney clear
Crown removal and forming take place high above paths, gardens and parking spots. Small pieces can fall despite careful handling. The ground under the chimney should be kept clear while work is under way.
We mark or protect the area below when needed and explain where equipment will stand. Move cars that are parked beside the chimney and keep children and pets indoors or away from that side of the house. Tell us about windows or doors that open directly under the work.
Protecting a new crown while it cures
New concrete needs the right conditions while it gains strength. Strong sun, drying wind and heavy rain can all harm a fresh surface. The protection used depends on the weather on the day and the material chosen.
We explain how the new crown will be protected and how long the work area must be left alone. If the chimney has to stay covered, we say so. Keep ladders and roof traffic away from the crown until we confirm it can be touched.
What the free crown inspection covers
- Reinforcement planned for a new crown
- Cover over an open chimney each day
- Debris removal and haul-away
- Sealant type and backer material at the flue
Chimney crown questions we hear
Will you tell me if the brick under the crown is damaged?
Yes. Once the old crown is off, the top courses are easy to see. If loose brick or failed joints turn up, we stop, show you the condition and price that work as a separate item before continuing.
Does the workmanship warranty cover crown repair in Edgewood?
Yes, the agreed crown work carries our workmanship warranty. Your written record states what was done, which helps if a question comes up later. Trouble from a separate part, such as a failed cap or flashing, is discussed as its own item.
Will crown work damage my roof covering?
The roof is protected where we stand, stage material and apply products. Spills are cleaned as the work proceeds. Tell us about fragile roofing before the visit so the access plan accounts for it.
More Ways to Care for Your Fireplace
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo