Chimney crown replacement and repair across Gladeview
Upfront pricing for crown work, with any extra item explained before it is added to the job.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Clues that the chimney crown lets water in
- Concrete chips in the gutter
- Dried or split caulk around the flue
- Dampness at the fireplace after heavy rain
- Loose cap fixings set into the concrete
Jump to
Reading the crown before choosing a repair
Cap fasteners drilled into the crown
Many rain caps are fastened into the crown or clamped to a flue tile. Holes drilled into a crown are small openings for water if they are not sealed. Loose or rusted fasteners can also crack the concrete around them.
During a crown visit we check how the cap is attached and whether its fixings have damaged the top. If the crown is replaced, the cap comes off and goes back on afterwards when its condition allows. A cap that needs replacing is priced as a separate item, not folded into crown work.
Reading the crown from the ground
You can learn a lot about the crown without climbing. Look for chunks of concrete in gutters or on the roof near the chimney. Look for dark streaks down the brick just below the top, or a patch of growth that stays green on the crown.
Brick industry maintenance guidance suggests binoculars for looking at high masonry. They help here too. Note what you see and tell us when you call. Leave the roof to us, because a steep or slick surface is not worth the risk for a closer look.
Checking for hollow or loose crown sections
A crown can look intact and still have loose sections. Tapping lightly across the surface tells us where the concrete sounds solid and where it sounds hollow. Hollow areas have usually separated from the concrete or brick beneath.
This check shapes the whole recommendation. A coating over hollow concrete fails when the section breaks away. We mark the hollow areas and explain whether they can be removed and patched or whether the crown has lost too much to keep. You hear the reasoning on site.
Why an unused chimney still needs its crown
A fireplace that is never lit can make the chimney feel unimportant. The crown still sits in the weather every day. If it cracks, water enters the masonry and can reach ceilings, walls and the firebox below.
An unused chimney also gets less attention, so problems can run longer before anyone notices. A free inspection tells you whether the crown needs work now. We explain the options plainly, including when doing nothing yet is reasonable for a sound top. Keep the written findings for the next visit.
Crown repair scope, item by item
- Overhang and drip edge check
- Protection for roof covering and brick faces
- Top course brick condition below the crown
- Separate lines for cap or liner defects
Chimney crown questions we hear
Will a new cap stop water coming through the crown?
No. A cap covers the flue opening, while the crown covers the masonry around it. Water that enters through a broken crown keeps entering under a new cap. We check both parts and price each one on its own line.
When can the fireplace be used again after crown work?
That depends on the product and the weather during curing. We give you waiting instructions for the material actually used on your chimney. Follow them even if the surface looks dry, because curing continues after the top looks finished.
Do I need to be home while you work on the crown?
Not always. We need access to the roof and a clear area below the chimney. Tell us about gates, pets or parked cars. We walk you through the findings before work starts and again when the job is finished.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo