Repairing and replacing chimney crowns in Hillsboro Beach
Tell us where the water shows up, and we check whether the crown is part of its path.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What a failing crown shows from the ground
- Hairline cracks across the crown surface
- Crumbling edges along the crown overhang
- Loose cap fixings set into the concrete
- Crown and brick separating along the top course
Jump to
Crown repair decisions explained plainly
When cracks run through the crown
A crack that runs from the flue to the outer edge may go through the full depth of the crown. Water can then travel down into the chimney. Pieces may also shift or lift as the crack widens.
Through-cracks change the repair. Filling the surface line does not rejoin the concrete underneath, and coatings are meant for sound material. We tap and inspect the sections on either side. When the crown is split into loose pieces, replacement is usually the honest recommendation, and we explain why.
What mortar crown repair should mean
A request for mortar crown repair usually concerns that thin sloped topping. Patching it with more of the same mortar can look tidy for a while. The new patch shares every weakness of the old layer, including thin edges and no drip.
We explain the options in order. A firm topping with fine cracks may take a coating. A cracked or loose topping is removed, and a new crown is formed with proper thickness, slope and overhang. You choose after seeing what the inspection found on your chimney.
Crown work and a damaged flue liner
The crown surrounds the top of the flue liner, but it does not repair the liner. A cracked tile, a gap between tiles or a liner that has broken at the top are flue problems. They need their own assessment.
When we see liner damage during crown work, we describe it and explain its effect on the crown plan. Sometimes the liner top must be dealt with before the new crown can be sealed to it. That work is priced separately so you can see how the two jobs relate.
Keeping the flue sealant joint in good order
The sealant joint at each flue is often the first part of a crown to wear. Brick industry maintenance guidance expects sealants to need replacing well before the masonry around them. A split or hardened bead lets water run between liner and crown.
During maintenance visits we check that joint on every flue. Failed sealant is cut out, the joint is cleaned and primed, and a new bead goes in over backer material. It is a small job that protects the larger work of the crown.
Separate lines for crown, cap and flue
- Formwork for a cast-in-place crown
- Top course brick condition below the crown
- Debris removal and haul-away
- Separate lines for cap or liner defects
Chimney crown work, questions and answers
Do I need to be home while you work on the crown?
Not always. We need access to the roof and a clear area below the chimney. Tell us about gates, pets or parked cars. We walk you through the findings before work starts and again when the job is finished.
Can a crown be replaced with a precast concrete top?
Where the chimney size and access allow it, a precast crown is an option, and brick industry guidance rates prefabricated tops well. It is set on a mortar bed with a bond break. We explain whether precast or cast in place suits your chimney.
Will crown work damage my roof covering?
The roof is protected where we stand, stage material and apply products. Spills are cleaned as the work proceeds. Tell us about fragile roofing before the visit so the access plan accounts for it.
More Ways to Care for Your Fireplace
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo