Chimney crown coating and replacement options in Leisure City
Fine cracks and a failed crown need different answers, and you see which one applies before approving anything.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Crown problems to point out in Leisure City
- Moss or growth holding on the crown
- A crown patch that has cracked again
- Dampness at the fireplace after heavy rain
- Brick joints washing out just below the top
Jump to
The crown repair options we weigh with you
A framed chimney has a cover, not a crown
Some chimneys are wood-framed boxes around a factory-built metal flue. Their top is a sheet-metal chase cover, and there is no masonry crown to repair. From the yard, the two can look alike, especially under a painted finish.
We confirm how the chimney is built before talking about crown work. If the top turns out to be a chase cover, we say so and explain that it belongs to a different repair. Nobody should pay for crown sealing on a chimney that has no crown.
Flashing beneath a new cast crown
Brick industry guidance highly recommends flashing under a cast-in-place crown and notes that it can also serve as the bond break. The layer separates the new concrete from the brick and helps keep water out of the wall below.
This flashing is different from the roof flashing where the chimney meets the roof. We explain both terms so your estimate does not blur them. If the roof flashing also needs work, it appears as a separate item, and the crown scope stays limited to the top.
The brick courses right under the crown
The top few courses of brick take water from any crown that fails. Their joints may wash out and their faces may flake. Once the old crown comes off, their condition is much easier to see.
We tell you before removal that the top courses will be assessed, and what happens if they are loose. Relaying or repointing that brick is masonry work with its own line on the estimate. We stop and explain before adding it, so the crown price does not grow without your approval.
The masonry a crown sits on
The residential code defines a masonry chimney as one built of solid units, hollow units grouted solid, stone or concrete. The crown sits on top of that structure and depends on it. A sound crown needs a sound chimney beneath it.
During the inspection we look at the masonry at the top as well as the crown. If the structure is sound, crown work can proceed as planned. If the masonry shows movement or loose units, we explain what needs attention first and price it separately.
What we check before quoting crown work
- Overhang and drip edge check
- Curing time and weather protection
- Separate lines for cap or liner defects
- Workmanship warranty on agreed crown work
What people ask about crown sealing
How do you decide between coating and a new crown in Leisure City?
We check firmness, slope, the edges and the joint at each flue. A sound crown with surface cracks may take a coating. Broken edges, loose sections or no slope point to removal and a new crown. You see the reasoning before you approve either one.
Can you repair the crown without removing the chimney cap?
Sometimes a coating can be applied around the cap fixings. A new crown usually means taking the cap off and setting it back afterwards. We explain whether the cap can be reused or whether its condition makes it a separate item.
Is a mortar wash on top of my chimney the same as a crown?
It sits in the same place, but a thin sloped mortar topping is not built like a formed crown. Brick industry guidance warns that thin, feathered edges are more prone to deterioration. We check whether yours can be coated or should be replaced.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo