Throat dampers repaired or replaced in Broadview Park

Freeing and re-hanging come before replacement, so new parts go only where the old ones cannot be kept.

Owned and run locally
Available for same-day service
Fully licensed and insured
Family owned and run

Call Now (645) 465-4171 Book Online

Signs of a worn damper in Broadview Park fireplaces

Handle swings with no resistance
Rattling above the fireplace on windy days
Crank turns without moving the plate
Control that needs force to move

Jump to

Damper work, from handle to plate

Smoke at the top of the fireplace opening

Smoke rolling out under the lintel has several possible causes, and the damper is only one of them. A plate that opens partway, drops during a fire or has a bent edge can narrow the throat. So can debris that the plate has pushed onto the shelf.

We separate a damper fault from other causes before quoting. With the fire out, we check the plate's full travel and position. If the damper opens properly and smoke still spills, we explain what else may be involved and whether it belongs to a different service. You get a straight answer about what damper repair can and cannot fix.

Marking the open and closed positions

After repair, you should be able to tell from the room whether the damper is open. On many controls that means a clear handle position, a notch or a mark. On others it means a quick look up with a flashlight.

We show you both positions before we leave and explain how the handle relates to the plate. One wood fireplace owner manual tells owners to confirm the damper is fully open by looking up from inside the fireplace before lighting it. That habit takes moments and prevents a smoky room.

A damper that opens only partway

A plate that stops short of fully open may be blocked by debris, bent at an edge or limited by a worn control. It may look open from the room while half the passage stays closed.

Look up with a flashlight and note where the plate stops. We confirm its full travel and find what limits it. Fires under a partly open plate tend to smoke, so leave the fireplace unused until the plate opens fully. The fix may be as small as clearing the shelf behind it.

Heavy deposits on the plate

A thick layer of deposits on the plate adds weight and can stop it seating on the frame. It also hides rust and cracks underneath, so the plate cannot be judged until it is cleaned.

We clean the plate enough to see its condition before recommending anything. The plate often turns out sounder than it looked. If the deposits come from how the fire burns, we mention it. A sweep of the flue may be recommended when the deposits continue above the damper, and that is listed separately.

Damper work priced item by item

Firebrick removed and reset for access
Open and closed positions shown to you
Separate prices for any added items
Operation check from inside the room

Common damper replacement questions

Do you need to remove firebrick to replace a damper frame?

Sometimes. Setting a new frame can mean removing and resetting some masonry around the throat. If that is needed, it appears on the estimate before you approve, together with how the brick will be reset.

What does the free inspection look at on my damper?

We check the plate, frame, pivots and control, how far the plate travels and how it seats. We also look at the smoke shelf and throat. You get the findings explained and a free written estimate.

Is there a discount when I book damper work promptly?

Yes. Damper work you book inside 72 hours of your free inspection is 10% off, along with any other service in that booking. The inspection and written estimate are free whether or not you book.

Proudly American

Local service. Careful repairs. A fireplace worth coming home to.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Chimney & Fireplace Brands We Work With

DuraVent
Olympia Chimney and Venting
Copperfield Chimney Supply
Rutland
Heatilator
Heat & Glo