Fireplace damper replacement for Goulds homes
We check the damper cold, explain what we see, and leave the decision with you.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When the damper stops doing its job
- Damper stuck shut before a fire
- Plate drops shut while a fire burns
- Rattling above the fireplace on windy days
- Daylight visible past the closed plate
Jump to
Your throat damper, part by part
Setting a new frame in the throat
A replacement frame has to sit firmly in the throat so the plate closes squarely against it. Setting it may mean removing some mortar or brick around the old frame and resetting it afterward. Joints close to the fire are made with a mortar rated for that heat, following the product instructions.
We keep the disturbance as small as the job allows. Any firebrick that must come out is noted on the estimate, along with how it will be reset. If the throat masonry turns out to be weaker than expected, we stop and explain before going further.
Homes with more than one fireplace damper
Each fireplace has its own damper, and one may be fine while another has failed. If your home has more than one fireplace, tell us which one is giving trouble and whether the others are used.
We can check each damper during the same free inspection, with each one listed separately on the estimate. That way you can repair one now and plan the other later. A chimney may hold flues for more than one fireplace, but each damper still works and fails on its own.
What the free inspection covers for a damper
The free inspection looks at the damper plate, frame, pivots and control, and at how far the plate travels. We also look at the smoke shelf and the throat around the frame, since both affect the damper.
We tell you what we found, what it means for use, and what we recommend. The findings become a free written estimate. If something is outside the damper, such as the firebox or the chimney top, we mention it and list it separately so you can decide on each item.
Why the damper metal matters
The Florida Building Code calls for a ferrous metal damper in a masonry fireplace. Cast iron and steel meet that description and stand up to the heat above a wood fire.
Replacement parts are chosen to suit that requirement and the fireplace. Parts made for other uses, or improvised plates, are not a substitute. If you are unsure what your current damper is made of, we check during the inspection and explain what the replacement will be. The material is named on the estimate.
Damper items you approve first
- Smoke shelf debris clearance
- Plate re-hung on its pivots
- Old parts bagged and hauled away
- Notes on smoke chamber condition
What people ask about their dampers
How soon can I use the fireplace after damper work?
A new control or a freed plate can often be used once we finish. Where a frame was set in fresh mortar, the fireplace waits for that mortar to dry and cure as its maker directs. We tell you the plan.
Why does the damper rattle when the wind picks up?
A loose plate, worn pivots or a slack control rod can let the plate move in air currents. We find which part is loose and tighten, adjust or replace it. Tell us whether it rattles with the plate open or closed.
Is same-day damper repair available?
Same-day service is available when the schedule allows. Freeing a plate or fitting a stocked control can often be done in one visit. A part that must be ordered, such as a factory-built blade, needs a return visit.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo