
Throat dampers repaired or replaced in Health District
Stuck shut, stuck open or dropping during a fire, a throat damper fault usually has a cause we can find.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs of a worn damper in Health District fireplaces
- Daylight visible past the closed plate
- Crank turns without moving the plate
- Handle missing or snapped off
- No damper visible above the opening
Jump to
Fixing the damper you already have
Checking the damper well before you light a fire
Many fireplaces sit idle for long stretches and then get used only now and then. The damper may not have moved since the last fire. The days before you plan a fire are the moment to find out whether it still works.
Try the control with the fireplace cold, well ahead of the evening you have in mind. The plate should move smoothly and hold its position. If it sticks, drops or makes a grinding sound, leave it and arrange a look. Finding the fault early leaves time for any part that has to be ordered.
A family team on your fireplace damper
We are a family-owned, locally owned team. The person who inspects your damper explains the findings in plain terms, points to the part at fault and answers your questions before any work is agreed.
That matters on small jobs like dampers, where the fault is easy to misread from the room. You can ask questions during the inspection and again when the work is done. If you would like to see the part that failed, we show it to you before it is hauled away with the other debris.
How the damper discount window works
Approve the damper repair inside 72 hours of your free inspection, and you save 10% on that work. The window starts from your own inspection visit, not from a date on a calendar.
The discount applies to any service booked in that window, so other items on the estimate are included too. Beyond that there is no pressure. Read the estimate, sleep on it and ask what you need to. Booking after the window simply means the work is priced without the discount.
Heavy deposits on the plate
A thick layer of deposits on the plate adds weight and can stop it seating on the frame. It also hides rust and cracks underneath, so the plate cannot be judged until it is cleaned.
We clean the plate enough to see its condition before recommending anything. The plate often turns out sounder than it looked. If the deposits come from how the fire burns, we mention it. A sweep of the flue may be recommended when the deposits continue above the damper, and that is listed separately.
The damper checks behind your estimate
- Firebrick removed and reset for access
- Model and serial number lookup
- Open and closed positions shown to you
- Workmanship warranty on completed damper work
Damper questions worth asking
Why does the damper rattle when the wind picks up?
A loose plate, worn pivots or a slack control rod can let the plate move in air currents. We find which part is loose and tighten, adjust or replace it. Tell us whether it rattles with the plate open or closed.
Will replacing the damper cure a smoky fire?
Only if the damper caused it. We check the damper's travel first. If it opens fully and smoke still spills, we explain the other possible causes and which service handles each. A working damper is not replaced to treat a draft problem.
Should I close the damper while embers are still glowing?
No. Leave the damper open until the fire is out and the firebox has cooled. Glowing embers still give off smoke and gases, and those need the open flue to leave the house.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
