Chimney damper repair, part by part, in Kendall West
A damper should open fully, close squarely and move from the room. We work toward all three.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Damper trouble that shows at the handle
- Handle swings with no resistance
- Soot stains above the fireplace opening
- Handle missing or snapped off
- Control that needs force to move
Jump to
Throat damper repair for homes in Kendall West
If a carbon monoxide alarm sounds
If a carbon monoxide alarm sounds while the fireplace is in use, get everyone out of the house. Once you are outside, call 911 and wait there until responders say the house is clear. Do not go back in to close the damper or to put out the fire.
An alarm means the detector has sensed carbon monoxide in the room. A damper that closed on its own or opened only partway is one possible reason, and there are others. Leave the fireplace unused until the cause has been found and the damper and flue have both been checked.
Where damper work stops and chamber work starts
The damper and the smoke chamber sit next to each other, but they are different parts of the fireplace. Damper work covers the plate, frame, pivots and control. The chamber above is a masonry space with its own repair methods.
If we see open joints or rough masonry in the chamber while working on the damper, we note it. We explain whether it affects the damper and whether it needs attention now. Smoke chamber repair is priced as its own line, so the damper job stays clear and you choose what goes ahead.
Damper records when you sell a home
Buyers often ask whether a fireplace works. A damper that opens, closes and is recorded as serviced is an easy item to answer. A seized or missing damper is better found by you than by a buyer's inspector.
If you plan to sell, a damper check can be arranged well ahead of listing. We explain what works and what does not, and you decide what to repair. The written record then goes into the documents you hand to the buyer. Nothing in it claims more than the work we did.
A flashlight check you can do yourself
With the fire out and the firebox cool, shine a flashlight up past the opening. You should see the damper plate and whether it is open or closed. Move the control slowly and watch the plate follow.
If the plate does not follow the control, stays tilted or stops short, stop there and make a note. You have learned enough to describe the fault. Avoid reaching into the throat or leaning under loose debris. The rest of the check is ours to do.
The damper checks behind your estimate
- New damper assembly, where needed
- Operation check from inside the room
- Nesting material cleared from the plate
- Open throat covered at each day's close
Asked before damper work begins
Can you replace the damper in a factory-built fireplace?
Yes, using the parts the manufacturer lists for that model. We need the model and serial number from the label. Unlisted parts are not fitted, because the fireplace's listing depends on its tested components.
Does damper work include sweeping the chimney?
No. Damper work covers the plate, frame, pivots and control, plus clearing debris that blocks them. If the flue needs sweeping first, that is a separate service, listed on its own line with a reason.
Is damper repair covered by a warranty?
Our workmanship warranty covers the work we did on the damper. If our repair does not hold as it should, tell us and we come back to look at it. Ask us to explain the terms for your job before you approve.
More Ways to Care for Your Fireplace
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
- Wood-Burning Fireplace Insert InstallationFit a wood-burning insert after assessing its host fireplace and full connection requirements.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo