Chimney damper replacement for homes in Lauderdale Lakes
We find which damper part has failed, explain the fix, and do nothing until you approve it.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Damper problems worth a free inspection
- Plate will not open past halfway
- Rust flakes collecting on the firebox floor
- Daylight visible past the closed plate
- Damp debris resting on the smoke shelf
Jump to
Your throat damper, part by part
Marking the open and closed positions
After repair, you should be able to tell from the room whether the damper is open. On many controls that means a clear handle position, a notch or a mark. On others it means a quick look up with a flashlight.
We show you both positions before we leave and explain how the handle relates to the plate. One wood fireplace owner manual tells owners to confirm the damper is fully open by looking up from inside the fireplace before lighting it. That habit takes moments and prevents a smoky room.
Firebrick found loose during damper work
Working in the throat gives a close view of the firebox below it. Cracked firebrick, open joints or a loose back wall may come to light. Those are firebox repairs, not damper repairs.
We tell you what we saw and whether it affects safe use. If a firebrick must come out to reach the damper frame, resetting it is part of the damper job. Other firebox work is listed as a separate item, with the reason and the likely method, so nothing is added to the job quietly.
Same-day damper service when available
Same-day service is available when the schedule allows. A damper stuck shut before a planned fire is a common reason people ask for it.
When the schedule allows a visit that day, we inspect, explain and, with your approval, complete what can be done then. Parts that must be ordered cannot always be fitted on the same visit. In that case we explain whether the fireplace can be used safely before the part arrives, or whether it should stay unused until the repair is finished.
Check the damper with the fire out
The damper should be tried and checked with the fireplace cold. A hot damper can burn hands, and a fire under a damper that suddenly moves can spill smoke into the room.
That is how we inspect it, and it is how we suggest you check it too. Open and close it slowly, watch the plate with a flashlight and listen for grinding. If anything seems wrong, leave the damper alone and describe what you saw when you call. A clear description saves time on the visit.
Damper repair scope for Lauderdale Lakes homes
- Plate, frame and pivot condition check
- Smoke shelf debris clearance
- Throat measurement for a replacement damper
- Notes on nearby firebrick condition
Asked before damper work begins
What if my factory-built fireplace model is no longer made?
We check the manufacturer's parts information for an approved replacement. If none exists, we explain what that means for the fireplace and the options you have. We do not adapt a listed unit to take a part it was not tested with.
Is it normal for a fireplace damper to show some rust?
Yes. A damper sits where heat and moisture meet, so light surface rust is common. Deep scale, pitting or holes are not normal. They usually point to water reaching the plate from above.
Does damper work include sweeping the chimney?
No. Damper work covers the plate, frame, pivots and control, plus clearing debris that blocks them. If the flue needs sweeping first, that is a separate service, listed on its own line with a reason.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo