Fireplace damper replacement for Lauderhill homes
A rusted, warped or missing damper can usually be put right without rebuilding the fireplace.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When the damper stops doing its job
- Plate stays open and will not close
- Plate drops shut while a fire burns
- Control rod slipping out of its notch
- Control that needs force to move
Jump to
Damper service for fireplaces in Lauderhill
A damper that stays open all year
A plate stuck in the open position lets the fireplace behave like an open window. Air-conditioned air can drift up the flue, while outside air, insects and noise drift down. Damper makers describe a closed flue as a way to limit heating and cooling loss, and a stuck plate gives that up.
Mention when you last saw the plate move and whether the handle feels locked. An open plate is often seized by rust or propped by debris on the smoke shelf. We clear what holds it and check whether it still seats against its frame once it closes.
Damper parts inside a factory-built unit
A factory-built fireplace is a listed assembly. Its damper, its control and the parts around them were tested as part of that listing. The Florida Building Code asks that such fireplaces be installed to their listing and the manufacturer's instructions.
That means replacement damper parts come from the manufacturer's parts list for your model. A generic plate meant for a masonry fireplace is not a substitute. We find the model information, check which listed parts are available, and tell you plainly if the design has been discontinued.
A family team on your fireplace damper
We are a family-owned, locally owned team. The person who inspects your damper explains the findings in plain terms, points to the part at fault and answers your questions before any work is agreed.
That matters on small jobs like dampers, where the fault is easy to misread from the room. You can ask questions during the inspection and again when the work is done. If you would like to see the part that failed, we show it to you before it is hauled away with the other debris.
Flakes of rust below the damper
Small flakes of rust on the firebox floor usually come from the damper above. They show that the plate or frame is shedding scale, often where moisture has reached it.
A few flakes are common and do not mean the damper is failing. A steady fall of scale, or pieces large enough to notice, suggests the metal is thinning. Mention what you see when you call. We check how much sound metal is left and whether water is reaching the plate. The answer decides between cleaning and replacement.
Damper work priced item by item
- Rust scale removal from plate and frame
- Frame reset with heat-rated mortar
- Separate prices for any added items
- Nesting material cleared from the plate
What people ask about their dampers
Can a rusted damper plate be saved, or must it go?
Often it can be saved. Light rust cleans off, and seized pivots can usually be freed. A plate that has rusted through, split or warped badly is replaced. We show you which case applies during the free inspection.
Will a new throat damper stop all air from escaping?
A throat damper is not airtight. A cast plate closes metal against metal and leaves small paths for air. A good repair closes the plate squarely, without wide gaps or rattle, which limits the loss.
Will you show me the damper part that failed?
Yes, if you would like to see it. We point out the worn pivot, broken lug or bent rod before replacing it. Old parts are then bagged and hauled away with the rest of the debris.
More Ways to Care for Your Fireplace
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
- Hurricane and Storm Damage Chimney RepairAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo