Fireplace damper replacement for Pembroke Park homes
Freeing and re-hanging come before replacement, so new parts go only where the old ones cannot be kept.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Damper symptoms you can check from the room
- Plate will not open past halfway
- Control rod slipping out of its notch
- Sooty smell drifting into the room
- Handle missing or snapped off
Jump to
Throat damper repair for homes in Pembroke Park
Flakes of rust below the damper
Small flakes of rust on the firebox floor usually come from the damper above. They show that the plate or frame is shedding scale, often where moisture has reached it.
A few flakes are common and do not mean the damper is failing. A steady fall of scale, or pieces large enough to notice, suggests the metal is thinning. Mention what you see when you call. We check how much sound metal is left and whether water is reaching the plate. The answer decides between cleaning and replacement.
A bent control rod or arm
A control rod bent by force or heat can bind in its slot. The handle then moves stiffly, and the plate may stop short of fully open without any sign from the room.
Straightening a bent rod can weaken it, so we usually replace it with a matching one. The plate and frame are checked at the same time, since whatever bent the rod may have strained them too. The estimate lists the rod on its own line. If the rod belongs to a factory-built unit, we order it from that model's parts list.
Children and pets during damper work
Damper work happens inside the fireplace, with tools, dust and loose parts close by. Keep children and pets out of the area until the job is done and the room is clean again.
We keep our work area tidy and the opening covered when we step away. If the job runs over more than one visit, the fireplace is left in a safe state between visits. We tell you whether it can be used in the meantime or should stay out of service.
Why the damper metal matters
The Florida Building Code calls for a ferrous metal damper in a masonry fireplace. Cast iron and steel meet that description and stand up to the heat above a wood fire.
Replacement parts are chosen to suit that requirement and the fireplace. Parts made for other uses, or improvised plates, are not a substitute. If you are unsure what your current damper is made of, we check during the inspection and explain what the replacement will be. The material is named on the estimate.
Line items for a fireplace damper
- Pivot cleaning and freeing
- Free written estimate before any work
- Nesting material cleared from the plate
- Workmanship warranty on completed damper work
Before you approve damper work
Can a rusted damper plate be saved, or must it go?
Often it can be saved. Light rust cleans off, and seized pivots can usually be freed. A plate that has rusted through, split or warped badly is replaced. We show you which case applies during the free inspection.
How can I tell whether my damper is open or closed?
With the fire out, shine a flashlight up past the opening and move the control slowly. You should see the plate turn and stop. After a repair we show you the handle positions for open and closed.
What should I tell you about the damper before the visit?
Tell us what the handle does, where the plate seems to stop and whether it rattles, sticks or drops. Mention whether the fireplace is factory-built and read us the label if you can. Do not reach into the throat.
More Ways to Care for Your Fireplace
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo