Damper repair for fireplaces in Shorecrest
Tell us what the handle does, and we check the plate, frame and pivots before naming a repair.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Damper symptoms you can check from the room
- Grinding or squealing when the control moves
- Rust flakes collecting on the firebox floor
- Daylight visible past the closed plate
- Soot stains above the fireplace opening
Jump to
Damper work, from handle to plate
Blade assembly and control as separate parts
A factory-built fireplace parts list can show the damper blade and the damper control as separate service parts. A broken control does not always mean a new blade, and the reverse is also true.
We identify which part has failed and order only that one where the design allows it. If the manufacturer supplies them only as a set, we say so. Parts that are not on the model's list are not fitted, because the listing depends on the tested parts working together.
A damper after evidence of a past chimney fire
Where there is evidence of a past chimney fire, the damper is one of the parts that heat can distort. The plate may warp, the pivots may seize and the frame may crack. Those changes are not always visible from the room.
The fireplace should be looked at before any further use. We describe what the heat did to the damper and whether it can be kept. Fire damage beyond the damper is outside this work, so we tell you what we saw and keep the damper as its own item.
A damper question when you buy a home
A new home can come with a fireplace nobody has used for a while. The damper may work perfectly, or it may be rusted in place. The seller may not know either way, and a quick look at the handle will not settle it.
Ask for any manuals or records that came with the fireplace. Before you plan a fire, try the control gently and see whether the plate moves. If it does not, or you cannot tell, the free inspection covers the damper, and the estimate lists anything it needs.
Same-day damper service when available
Same-day service is available when the schedule allows. A damper stuck shut before a planned fire is a common reason people ask for it.
When the schedule allows a visit that day, we inspect, explain and, with your approval, complete what can be done then. Parts that must be ordered cannot always be fitted on the same visit. In that case we explain whether the fireplace can be used safely before the part arrives, or whether it should stay unused until the repair is finished.
Items on a damper repair estimate
- Plate travel from open to closed
- Seat check with the plate closed
- Workmanship warranty on completed damper work
- Open throat covered at each day's close
Before you approve damper work
Will you show me the damper part that failed?
Yes, if you would like to see it. We point out the worn pivot, broken lug or bent rod before replacing it. Old parts are then bagged and hauled away with the rest of the debris.
Will replacing the damper cure a smoky fire?
Only if the damper caused it. We check the damper's travel first. If it opens fully and smoke still spills, we explain the other possible causes and which service handles each. A working damper is not replaced to treat a draft problem.
Should I close the damper while embers are still glowing?
No. Leave the damper open until the fire is out and the firebox has cooled. Glowing embers still give off smoke and gases, and those need the open flue to leave the house.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo