Throat dampers repaired or replaced in Tamarac

Same-day damper visits are available when the schedule allows, with every repair explained first.

Owned and run locally
Available for same-day service
Fully licensed and insured
Family owned and run

Call Now (645) 465-4171 Book Online

What a failing throat damper looks like

Grinding or squealing when the control moves
Daylight visible past the closed plate
Sooty smell drifting into the room
Handle missing or snapped off

Jump to

Getting a stiff damper moving again

When heat has warped the plate

Cast plates can warp after repeated hot fires, or after one very hot one. A warped plate no longer lies flat against its frame, so it leaks air when closed and can bind when opened. The fault may show as an uneven edge when you look up with a flashlight.

A slight warp does not always justify a new damper. We judge whether the plate still opens fully and closes well enough to do its job. Where it binds or leaves a wide gap, a replacement plate or a new assembly goes on the estimate, with the reason written next to it.

What to tell us about your damper when you call

Describe what the damper does when you try it. Say whether the handle moves freely, sticks or will not move, and whether the plate stays put, drops or rattles. Mention whether the fireplace is masonry or a factory-built unit, if you know.

Those details help us plan the visit and bring the right tools. For a factory-built unit, the model information from the label is useful too. You do not need to open anything or reach into the throat. A plain description of the symptoms is enough to start.

A rarely used fireplace still needs a working damper

Even a fireplace that is almost never lit relies on its damper every day. Closed, it keeps room air in and outside air out. Open or missing, it lets both move freely through the flue.

If you rarely use the fireplace, a damper that closes well matters more than one that opens smoothly. We check both movements and tell you whether the plate closes squarely. A repair aimed at the closed position may be smaller than you expect, and it is priced on its own.

A bent control rod or arm

A control rod bent by force or heat can bind in its slot. The handle then moves stiffly, and the plate may stop short of fully open without any sign from the room.

Straightening a bent rod can weaken it, so we usually replace it with a matching one. The plate and frame are checked at the same time, since whatever bent the rod may have strained them too. The estimate lists the rod on its own line. If the rod belongs to a factory-built unit, we order it from that model's parts list.

Damper work priced item by item

Replacement control matched to the plate
Hearth and floor protection during work
Separate prices for any added items
Nesting material cleared from the plate

Fireplace damper questions and answers

My damper handle snapped off. Is a new control enough?

Often, yes. If the plate and frame are sound, a replacement handle or rod may be all the damper needs. We check the plate and pivots before ordering anything, because a snapped handle sometimes points to a stuck plate.

Can I spray a lubricant on a damper that will not move?

We suggest leaving it alone. Many sprays are flammable and not made for the heat above a fire, and forcing the plate after spraying can crack the casting. Describe the fault to us and let us free it.

Is same-day damper repair available?

Same-day service is available when the schedule allows. Freeing a plate or fitting a stocked control can often be done in one visit. A part that must be ordered, such as a factory-built blade, needs a return visit.

Proudly American

Family owned and operated in Miami, Florida.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Chimney & Fireplace Brands We Work With

DuraVent
Olympia Chimney and Venting
Copperfield Chimney Supply
Rutland
Heatilator
Heat & Glo