Chimney flashing repair for homes in Galt Ocean Mile
A roof junction repaired properly once, rather than patched again after the next heavy rain.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When the chimney flashing may be the cause
- Water stain on the ceiling beside the chimney
- Damp wall next to the chimney breast
- Drips in the attic near the brick
- Cracked sealant along the mortar joint
Jump to
From findings to finished flashing work
Reading the attic framing beside the chimney
If your attic is reachable, look at the framing and roof deck where the chimney passes through. Dark stains, damp wood or rusted nails beside the brick suggest water getting past the roof junction. Stains only on the chimney side may point higher up the stack.
Step only on framing, use a good light and keep away from wiring. Note which face of the chimney shows the marks and whether they were wet or dry. Tell us what you found when you book, because it helps us plan which faces to open first.
Roof shapes that send water toward the chimney
Some roofs channel a lot of water toward the chimney. A valley ending just above the stack can do it. So can a large roof plane draining against its back face.
We look at where water arrives from before choosing the metal and the detail. A junction that handles a light share of runoff may not cope with a heavy one. If the roof shape itself is the issue, we note it and explain what the flashing can and cannot do about it.
A wet ceiling with a dry firebox
Where the water appears inside can hint at the path. If the ceiling or wall beside the chimney is wet while the firebox and damper stay dry, the roof junction is a likely suspect. If the firebox is wet, water may be coming in at the top of the flue instead.
Neither pattern is proof on its own, but it tells us where to start. Tell us whether you have seen water inside the fireplace itself. We then check the flashing and the top together, and the findings say which evidence pointed where.
Flashing when the stack above the roof is rebuilt
If the chimney above the roof line has to be rebuilt, the flashing is tied into the new masonry as the work goes up. That is part of the rebuild scope, not a separate flashing job. New reglets are formed in the new joints.
We mention this because a flashing repair on a stack that needs rebuilding would be undone. If the masonry above the roof is loose, cracked through or leaning, we explain the rebuild question first. If it is sound, the flashing repair stands on its own.
Your free flashing inspection looks at
- Tile breakage and replacement terms
- Crown and cap noted as separate items
- Protection for roof, yard and windows
- Openings covered at the end of each day
Before you approve flashing work in Galt Ocean Mile
Does flashing repair mean the roof has to come off?
No. The work reaches only the roofing next to the chimney, which is lifted, set aside and put back around the new metal. If that roofing is too worn to reuse, we say so in the estimate and explain the options before you approve.
Do you lift and replace the tiles or shingles around the chimney?
We lift and restore the roofing next to the chimney as part of the flashing work. If pieces break or are too worn to reuse, replacements are listed as a separate item. Wider roofing work is a job for a roofer, and we say where our scope stops.
Can I see what failed on the old flashing?
Yes. Ask before the work starts and we set the old pieces aside so you can see the rusted laps or short corners. The written record of the work also describes what we found when the old metal came out.
More Ways to Care for Your Fireplace
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo