Chimney reflashing and flashing repairs in Nurmi Isles
We separate flashing leaks from crown, cap and roofing leaks, so you pay for the part that failed.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Flashing problems we look for in Nurmi Isles
- Water stain on the ceiling beside the chimney
- Cracked sealant along the mortar joint
- Wet attic insulation around the stack
- Metal bent or lifted after strong wind
Jump to
Chimney flashing repair in Nurmi Isles, explained
When a reseal is the right answer
Resealing is sometimes all a chimney junction needs. If the metal is sound, the laps run the right way and only the sealant along the reglet has failed, new sealant can close the gap. That is a smaller job than replacing metal, and it should be priced as one.
We recommend a reseal only when the evidence supports it. If the metal is rusted, cut short or lapped wrongly, fresh sealant would hide the problem for a short time. In that case we explain why a reseal is not enough and what the fuller repair involves.
Clear a path to the attic hatch
During the free inspection we may ask to look in the attic around the chimney. It helps to know where the hatch is and to clear the space beneath it. Move anything fragile away from the ladder spot.
If the hatch is in a closet, empty enough of it for a ladder to stand. Tell us if the attic has no floor near the chimney or if access is difficult, and we will plan for it. A short look from the hatch can confirm whether water is reaching the framing beside the stack.
Flashing work in Nurmi Isles follows the roof in place
Every flashing job in Nurmi Isles is sized to the chimney and roof in front of us. Two houses on the same street can need very different work, because the roofing, the metal and past repairs differ. That is why we do not quote from a description alone.
The free inspection gives us what we need to write a specific scope. If you already have a quote from elsewhere, keep it handy. We can explain where our findings agree with it and where they differ, and why.
A small opening caught early
A counter flashing edge that has just started to pull away is a small repair when caught early. So is a short length of failed sealant. The same opening left for a long time can soften the deck and stain the ceiling.
If you notice something small, it is worth a look while it is still small. We tell you honestly if it can wait until another visit or whether it should be dealt with now. A minor reseal is priced as a minor reseal, not packaged into a larger job.
Scope notes for chimney flashing work
- Step flashing on each sloped side
- Flashing metal named in writing
- Fasteners matched to the flashing metal
- Hose water test when the job calls for it
Asked often about chimney flashing
Which metal do you use for new chimney flashing?
We choose it for the chimney and the roof, and brick industry guidance favors stainless steel or copper for chimney work. The code sets a minimum thickness for metal flashing. The estimate names the metal, so you know what goes on before you approve.
What does the flashing workmanship warranty cover?
It covers the flashing we installed and the way we installed it, as described in the written record. Parts of the roof or chimney outside the agreed scope are not included, which is why the scope is written out face by face.
Will the new sealant line match my mortar color?
It may not match exactly at first. We can discuss a sealant color closer to the mortar, and new mortar at a recut joint may tone down as it weathers. Water tightness comes first, but tell us if appearance matters.
More Ways to Care for Your Fireplace
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo