Repairing chimney counter flashing in Rio Vista
We separate flashing leaks from crown, cap and roofing leaks, so you pay for the part that failed.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Flashing trouble you may notice in Rio Vista
- Counter flashing standing away from the brick
- Stain returning after an earlier patch
- Peeling paint on the wall near the fireplace
- Leak that started after a roof replacement
Jump to
Flashing repair decisions you can follow
Metal roofing needs its own detail
A metal roof meets a chimney differently from shingle or tile. Panels and ribs leave no courses to weave step pieces into. The junction usually relies on formed pieces and closures that follow the panel profile, as the roofing maker details them.
We identify the panel type before quoting, because the detail changes with the profile. If the panels need a roofer to cut or refit them, we say who handles which part. Mention the roof installer's name if you know it. Their details for that panel can save guesswork at the chimney.
Clear a path to the attic hatch
During the free inspection we may ask to look in the attic around the chimney. It helps to know where the hatch is and to clear the space beneath it. Move anything fragile away from the ladder spot.
If the hatch is in a closet, empty enough of it for a ladder to stand. Tell us if the attic has no floor near the chimney or if access is difficult, and we will plan for it. A short look from the hatch can confirm whether water is reaching the framing beside the stack.
Water that appears without rain
If water or a damp patch appears near the chimney on a dry day, the flashing is probably not the cause. Flashing keeps out rain. Water without rain may come from plumbing, cooling equipment, condensation or something else in the attic.
Tell us if you have seen dampness in dry weather. We still check the flashing, but we also say when the evidence points away from the chimney. That can save you from paying for a roof junction repair that would not change anything.
A chimney that straddles the ridge
A chimney that comes through the roof at the ridge sits across both slopes. It has no uphill face in the usual sense. Instead, each side meets a slope running away from it, and the flashing steps down both ways from the peak.
The critical points move to where the ridge meets the chimney on each side. Those spots need pieces that turn over the ridge line and lap correctly onto the step flashing below. We check how they were formed, because a gap at the peak can let water run down inside both slopes.
What we look at before reflashing in Rio Vista
- Step flashing on each sloped side
- Uphill face and back pan
- Old roof cement cleaned back or removed
- Interior stain noted for follow-up
Asked often about chimney flashing
Can you repair flashing where a metal roof meets the chimney?
Yes, with details that follow the panel profile and the roofing maker's instructions. We identify the panel type first. If cutting or refitting panels is better done by a roofer, the estimate says so and shows where our part of the work ends.
Is there a charge for the flashing inspection in Rio Vista?
No. We do not charge for the inspection or for the written estimate it produces. You pay only for flashing work you approve, at the figure in the estimate, with no hidden fees added later.
Does flashing on a stucco chimney work differently?
The counter flashing has to meet cement plaster rather than brick joints. It may be set into a cut in the stucco or finished against a stop. Cracked stucco near the roof line is checked first, and stucco repair is priced separately.
More Ways to Care for Your Fireplace
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Hurricane and Storm Damage Chimney RepairAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo