Chimney flue repairs planned for Lauderdale Isles
Clay pieces in the fireplace are traced to their source before anything is quoted.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Clues that the flue needs repair
- Open joints between flue tiles
- A top tile broken off low
- A flue with no cap on top
- Glazed deposits hiding the tile surface
Jump to
Chimney flue repair details that matter in Lauderdale Isles
Flaking clay inside the flue
Moisture and corrosive combustion products can attack the face of clay flue tiles until thin layers flake away. Repair makers call this spalling. The flakes fall to the smoke shelf or the firebox, and the tile wall underneath grows thinner.
We look at how much of the tile surface has been lost and where. Light flaking on a few tiles is a different job from tiles that have lost much of their face. That difference decides whether resurfacing is realistic or whether the flue needs relining, and the estimate says which.
Protruding mortar that blocks a flue repair
Excess mortar sometimes sticks out into the flue at the joints between tiles. Repair makers ask for these ridges to come out before resurfacing. They block the application tools and disturb how flue gases rise.
Removing them is part of preparation, not an extra that appears later. We note any protrusions at the assessment and include their removal in the estimate. If they cannot be reached safely, we say what that means for the proposed method before you approve anything. Once removed, the passage is also easier to clean in future years.
A crack in the wall between adjacent flues
When a chimney holds more than one flue, the code expects masonry between them, with an exception where the flues serve a single appliance. A crack or open joint in the wall between two flues can let gases from one pass into the other.
We identify each flue and what it serves before judging a defect between them. The estimate says which flue is being repaired and whether the adjacent flue shows related damage. If the dividing masonry needs work, that is described as its own item. Dividing masonry is often hidden, so we say how much of it we could see.
The cleanout at the base of the flue
Masonry flues are supposed to have a small access door low down, unless the fireplace opening itself gives cleaning access. That little door, with its metal frame, sits exactly where fallen tile, soot and moisture gather.
We check whether the cleanout is present, whether its cover closes and what has gathered behind it. Fallen tile pieces often end up there. A damaged cleanout door is listed separately, and anything found behind it helps us understand the lining above. A cover that does not close lets air leak into the base of the flue.
The flue repair scope at a glance
- Concealed sections named in the findings
- Refractory mortar for any rejointing
- Room protection at the fireplace
- Conditional items stated with their triggers
Flue resurfacing answers in Lauderdale Isles
Why do you clean the flue before repairing it?
Repair materials bond to clean, sound masonry and clay, not to soot or glazed deposits, and repair instructions call for that cleaning. It also reveals defects that deposits were hiding, which we discuss before the plan changes.
Do you keep the chimney covered if the repair takes more than a day?
Yes. Before we come down each day, the flue opening is covered against rain and debris, and the fireplace area is protected and cleaned. Broken tile and cleaning residue are hauled away when the work is complete.
Is resurfacing the same as installing a liner?
No. Resurfacing restores the existing clay lining. One maker states that its sealant does not provide the thermal protection of a liner and is not meant to be used as one. A new liner is a separate job with its own estimate.
More Ways to Care for Your Fireplace
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo