Inspecting the chimney and fireplace in Bay Point
An inspection that separates confirmed defects from open questions, so each decision rests on evidence.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs that call for a chimney check
- A missing or loose chimney cap
- A house sale or purchase underway
- A fireplace sealed by a previous owner
- Cracks in the wall beside the fireplace
Jump to
What our chimney inspection looks at
Inspecting the flue lining
The lining is the inner surface of the flue that contains heat and smoke. In a masonry chimney it may be clay tile, a poured material or a metal liner. We look for cracks, gaps at joints, missing sections and signs of heat damage.
How much of the lining can be seen depends on access and deposits. We say how far the view reached from each end. If a section could not be seen, the record states it. We also explain whether cleaning ahead of time or another form of access would give a clearer answer.
How inspection findings are ranked
Not every finding needs action now. We sort what we see into three kinds: conditions that affect safe use, conditions that will get worse if left, and wear that can be watched. The ranking is explained along with each item.
That helps you plan. A cracked lining that lets heat reach the masonry comes before a stained crown. A small gap that lets water in comes before a patch of surface staining. You decide the order, but you decide it with the reasons in hand.
Scratching or calling sounds in the chimney
Sounds from inside the chimney usually mean an animal has moved in. An inspection can confirm where the animal is and how it got in. The flue may not be worked on until the animal question is settled. Some species and nests are protected.
Tell us what you hear and when. We look from a safe position and tell you what comes next, whether that is waiting, a referral or an animal removal visit. The entry point is then noted so it can be closed once the flue is empty.
Inspecting a fireplace that is used often
Regular fires wear a chimney steadily. Heat works on the lining and the firebox, deposits build in the flue and the cap screen can clog. Small problems show up sooner when the fireplace is used a lot.
An inspection for a heavily used fireplace pays closest attention to those wear points. We explain what we see and suggest a sensible time for the next look, based on your use and the condition rather than a general rule. The written record then gives the next visit something to compare against.
From firebox to cap, what gets inspected
- Listing label on a factory-built unit
- Lintel above the fireplace opening
- Concealed parts named as concealed
- Signs of animals or nesting
Questions about fireplace inspections
Do you inspect factory-built fireplaces too?
Yes. We look for the listing label and the model, check the panels, firebox, damper and visible chimney sections, and compare them with the manual. Repairs have to use the manufacturer's listed parts.
Does the inspection check clearances to wood and trim?
It checks the clearances we can see, such as trim around the opening and framing visible in an attic. Clearances inside finished walls are usually concealed, and the written record says so.
Does the inspection include looking at the flue lining?
Yes, along the length that can be seen from each end. We note cracks, open joints, missing sections and heat damage, and we say how far the view reached.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo