A chimney inspection in Bermuda Riviera with findings explained
An inspection that separates confirmed defects from open questions, so each decision rests on evidence.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When to have the fireplace inspected
- A rusted or stuck damper
- Cracks in the crown or brick
- Plans to add an insert
- Rust stains running down the chimney
Jump to
What the inspection covers and what it cannot
Looking at the brick and mortar outside
The exterior masonry shows how the chimney is handling water and weather. We look for cracked or flaking brick faces, eroded mortar joints, open cracks and loose units. Where the roof is safe to reach, we look closely; otherwise we look from the ground and say so.
Each defect is described by location and extent. Some are cosmetic, some let water in and some affect the structure. We explain which is which, so you can decide what needs attention now and what can be watched.
What an attic view adds to the inspection
If the chimney passes through an attic, that space can show things the roof and firebox cannot. We look for water stains on framing, clearances between the chimney and wood, and the condition of the chimney where it crosses the roof deck.
Tell us how to reach the attic and whether the opening is clear. We do not move stored belongings without asking. If the attic cannot be entered safely, we note it and explain what that leaves unconfirmed. Where it helps, a return visit for the attic alone can be arranged.
Debris that keeps falling into the firebox
Pieces of tile, mortar, brick or rusted metal in the firebox come from somewhere above. Their material tells us where to look. Tile points to the lining, mortar to joints or the smoke chamber, and rust flakes to the damper or cap.
Keep a few pieces for us to see. We match them to their source during the inspection and explain what is failing and why. The repair estimate then addresses the cause, not only the debris. Until then, keep the fireplace unused, because falling pieces mean something above is failing.
Who inspects your chimney
The inspection is carried out by our family team, and the findings come from the same people. The team that looked into your flue explains what it saw before the visit ends, while you can still point to anything you want to see again.
As a locally owned company, we would sooner go over a finding again than let it stay confusing. If a question needs more thought or a manual we do not have on hand, we say so and come back with the answer.
What we check on a fireplace inspection
- Cap, screen and fasteners
- Visible clearances to combustible material
- Deposits and blockages in the flue
- Written record of what was inspected
Questions about fireplace inspections
Do you inspect factory-built fireplaces too?
Yes. We look for the listing label and the model, check the panels, firebox, damper and visible chimney sections, and compare them with the manual. Repairs have to use the manufacturer's listed parts.
Can the inspection trace an odor coming from the fireplace?
It aims to. Tell us when the smell appears. We look at deposits, water in the masonry, debris on the smoke shelf and air moving down the flue, then explain which source the evidence supports.
What if your findings differ from an earlier opinion?
Show us the earlier findings. We look at the same parts and explain where we agree, where we differ and why. The goal is a clear basis for your decision.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo