Skip to content
(645) 465-4171

Fireplace inspection and chimney check in Fort Lauderdale

Tell us what worries you about the fireplace and the inspection is planned around that question.

  • Owned and run locally
  • Available for same-day service
  • Fully licensed and insured
  • Family owned and run

Reasons to have the chimney inspected

  • A rusted or stuck damper
  • Cracks in the crown or brick
  • Scorch marks near the fireplace opening
  • A chimney that seems to lean
Jump to

Inspecting your chimney in Fort Lauderdale, part by part

What the deposits inside the flue tell us

Soot and residue are part of what an inspection records. Their amount, texture and location say something about how the fireplace burns. A heavy, glossy coating needs a different response from a light layer of dry soot.

We describe what we see without turning the inspection into a cleaning. If the flue needs sweeping before its surface can be judged, we say so. Any cleaning or deposit treatment is priced as its own item and is your choice. We also mention what the deposits suggest about the wood and the way the fires are built.

Inspecting for the source of a chimney odor

A smell from the fireplace can come from deposits, water in the masonry, debris on the smoke shelf or air moving down the flue. The source decides the fix, so it is worth finding before anything is cleaned or sealed.

Tell us when the smell appears: after rain, with the air conditioning on or only when a fire is lit. We look at the flue, the shelf, the damper and the top with that pattern in mind. The findings say which source is most likely and what would address it.

Signs of earlier repairs on the chimney

Patches, fresh mortar, sealant along the flashing or a coating on the brick all show that someone has worked on the chimney before. They can be sound repairs or quick fixes that hide a continuing problem.

We note each repair we can see and whether it appears to be doing its job. A patch with fresh staining around it suggests the problem is still active. Records of the earlier work help us judge it fairly. If there are none, we describe the repair as we found it and what it seems to have been meant to fix.

Rust on metal parts of the chimney

Rust on the damper, lintel, cap or chase cover tells us water has been reaching that part. The rust itself can weaken the metal until it fails. Rust stains running down the chimney face come from the same source.

We note each rusted part and how far the rust has gone. The estimate addresses the part and, where possible, the water that caused it. Replacing a rusted part without stopping the water only delays the next failure. We explain which comes first when both are needed.

The inspection scope agreed at the start

  • Flashing at the roof junction
  • Listing label on a factory-built unit
  • Each flue matched to its appliance
  • Cleanout door or ash dump condition

Asking about an inspection in Fort Lauderdale

Do I have to use you for the repairs?

No. The inspection and any repair are separate decisions. The estimate is yours to keep and compare. Should you book it with us inside 72 hours of your free inspection, a 10% discount applies.

Should I have the chimney inspected after roof work?

It is a sensible step. Roof work disturbs the flashing and can leave debris or tarps on the chimney top. We look at the top, the flashing and the flue for anything that changed.

Does the inspection include looking at the flue lining?

Yes, along the length that can be seen from each end. We note cracks, open joints, missing sections and heat damage, and we say how far the view reached.

Proudly American

Local service. Careful repairs. A fireplace worth coming home to.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Send your details for a free Miami chimney or fireplace inspection. We will call to confirm the appointment.

Chimney & Fireplace Brands We Work With