Chimney inspection that starts with your question in Golden Heights
Recommended work you approve no later than 72 hours after your free inspection comes with 10% off.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Changes worth an inspection visit
- Smoke coming into the room
- Cracks in the crown or brick
- Roof work finished around the chimney
- A chimney that seems to lean
Jump to
Our approach to a fireplace inspection
Inspecting a factory-built fireplace
A factory-built fireplace is listed together with the chimney system it was tested with. The Florida Building Code requires both to be installed as the listing and the manufacturer's instructions say. We look for the listing label, the model and the parts that belong to it.
Panels, the firebox shell, the damper and the visible chimney sections are checked for cracks, rust, gaps and damage. We compare what we see with what the manual shows. Repairs have to use listed parts, so identifying the model matters before any estimate.
Inspecting after a suspected flue fire
After a suspected chimney fire, the fireplace should not be used until the flue has been looked at. Heat can crack tiles, open mortar joints and warp metal parts in places no one can see from the room. The deposits themselves may look puffed and honeycombed.
We look for those signs along the reachable length of the flue and at the smoke chamber and damper. The record states what was found and what could not be seen. Any repair is priced separately, and we explain what must be done before the next fire.
Inspecting a damper at the flue top
A damper at the top of the flue closes with a plate that seals against a gasket, controlled by a cable from the fireplace. We check that it opens fully, closes firmly and that the gasket is intact.
A stretched cable, a torn gasket or a weak spring stops it working as it should. We note each fault and whether it affects use. Repairs are priced separately, and we follow the damper's own instructions when describing them. We also check that the damper suits the fuel and the flue it serves.
Chimney inspections tied to a sale in Golden Heights
If a house in Golden Heights is changing hands, the chimney questions often come with a deadline. Tell us the date and what the buyer or seller needs to know. We plan the visit around those questions.
The findings describe the condition we saw and what stayed concealed. Any repair comes with a free written estimate that both sides can read. We do not issue a pass or fail, and we do not describe concealed parts as sound. The written record can be shared with whoever needs it.
Inspection scope for homes in Golden Heights
- Exterior brick, stone or stucco
- Mortar joints on each reachable face
- Deposits and blockages in the flue
- Metal liner top plate and cap
Before you arrange a chimney inspection
Is the initial chimney inspection really free?
Yes. The initial inspection of the accessible parts, the findings explained on site and a written estimate for any work cost nothing. Further investigation, such as pulling an insert, is a separate choice with its own price.
Do you inspect factory-built fireplaces too?
Yes. We look for the listing label and the model, check the panels, firebox, damper and visible chimney sections, and compare them with the manual. Repairs have to use the manufacturer's listed parts.
How do you decide which repairs come before others?
We rank findings by their effect on safe use, then by how quickly they will worsen. A fault that lets heat reach combustible material comes before a cosmetic one. You get the reasons with each item.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo